Car Oil Specs

Category: Chevrolet

  • 2014–2020 Chevy Impala Oil Type and Capacity (2.5L and 3.6L V6)

    Quick answer: the 2014–2020 Chevy Impala 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 with a filter change. The 2.5L 4-cylinder takes 5.0 qt (4.7 L) of SAE 5W-20 (0W-20 in the 2019 manual).

    EngineOil capacity (with filter)Oil typeSpecification
    3.6L V66.0 qt (5.7 L)5W-30dexos1
    2.5L 4-cylinder (2014–2019)5.0 qt (4.7 L)5W-20 (0W-20 alternative; 0W-20 in 2019)dexos1
    2.4L eAssist (2014)5.0 qt (4.7 L)5W-30dexos1
    Source: Chevrolet owner’s manuals (links below).

    V6 and 4-cylinder use different oils. The 3.6L V6 is 5W-30 in every manual. The 2.5L uses 5W-20 (0W-20 allowed), and the 2019 manual lists 0W-20. The 2020 manual covers only the V6.

    Oil capacity by year

    Model year2.4L eAssist2.5L3.6L V6
    20145.0 qt (4.7 L)5.0 qt (4.7 L)6.0 qt (5.7 L)
    2015—5.0 qt (4.7 L)6.0 qt (5.7 L)
    2016—5.0 qt (4.7 L)6.0 qt (5.7 L)
    2017—5.0 qt (4.7 L)6.0 qt (5.7 L)
    2018—5.0 qt (4.7 L)6.0 qt (5.7 L)
    2019—5.0 qt (4.7 L)6.0 qt (5.7 L)
    2020——6.0 qt (5.7 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    3.6L V6: SAE 5W-30 dexos1.

    2.5L: SAE 5W-20, 0W-20 allowed (2014–2018); SAE 0W-20 (2019).

    2.4L eAssist (2014): SAE 5W-30.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2014–2020 Chevy Impala

    See also: Oil life reset by brand.

    1. Display the remaining oil life on the Driver Information Center (DIC).
    2. Press and hold the select button (or SET/CLR) for several seconds until the oil life shows 100%.

    Reset only after an oil change; the system will not reset itself.

    Oil change tips

    • A 5-quart jug covers the 2.5L; the V6 needs one more quart.
    • Add a little less than the full capacity, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2014–2020 Impala V6 take?

    6.0 qt (5.7 L) of SAE 5W-30 with a filter change.

    How much oil does the Impala 2.5 take?

    5.0 qt (4.7 L) of SAE 5W-20.

    What oil does a 2019 Impala 2.5 use?

    The 2019 manual lists SAE 0W-20.

    Can I use 0W-20 in the 3.6 V6?

    No, the manuals specify 5W-30 for the V6.

    How do I reset the oil life on an Impala?

    Show the remaining oil life on the DIC and hold the select button until it reads 100%.

    Older Impala? See the 2011–2013 Chevy Impala oil type and capacity.

  • 2016–2019 Chevy Cruze Oil Type and Capacity (1.4L Turbo, 1.6L Diesel)

    Quick answer: the 2016–2019 Chevy Cruze 1.4L turbo takes 4.2 qt (4.0 L) of oil with a filter change: SAE 5W-30 in the 2016–2018 manuals and SAE 0W-20 in the 2019 manual. The 1.6L diesel (2017–2019) takes 5.3 qt (5.0 L) of 5W-30.

    EngineOil capacity (with filter)Oil typeSpecification
    1.4L turbo (LE2), 2016–20184.2 qt (4.0 L)5W-30dexos1
    1.4L turbo (LE2), 20194.2 qt (4.0 L)0W-20dexos1
    1.6L diesel (LH7), 2017–20195.3 qt (5.0 L)5W-30dexos2
    Source: Chevrolet owner’s manuals (links below).

    The 2019 manual switches the gas engine to 0W-20. Same 1.4L turbo and same 4.2 qt capacity, but the last-year manual lists SAE 0W-20 instead of 5W-30. The diesel stays on 5W-30 (0W-40 in extreme cold).

    Oil capacity by year

    Model year1.4L turboOil1.6L diesel
    20164.2 qt (4.0 L)5W-30—
    20174.2 qt (4.0 L)5W-305.3 qt (5.0 L)
    20184.2 qt (4.0 L)5W-305.3 qt (5.0 L)
    20194.2 qt (4.0 L)0W-205.3 qt (5.0 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    1.4L turbo: SAE 5W-30 dexos1 (2016–2018); SAE 0W-20 (2019).

    1.6L diesel: SAE 5W-30 meeting dexos2; 0W-40 below -20°F (-29°C).

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2016–2019 Chevy Cruze

    See also: Oil life reset by brand.

    1. Display the remaining oil life on the Driver Information Center (DIC).
    2. Press and hold the select button (or SET/CLR) for several seconds until the oil life shows 100%.

    Reset only after an oil change; the system will not reset itself.

    Oil change tips

    • A 5-quart jug covers the 1.4L; the diesel needs a 5-quart jug plus a little more.
    • Add a little less than the full capacity, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2016–2019 Cruze take?

    4.2 qt (4.0 L) for the 1.4L turbo and 5.3 qt (5.0 L) for the 1.6L diesel.

    What oil does a 2017 Cruze use?

    SAE 5W-30 dexos1 for the 1.4L turbo.

    What oil does a 2019 Cruze use?

    The 2019 manual lists SAE 0W-20 for the 1.4L turbo.

    What oil does the Cruze diesel use?

    SAE 5W-30 dexos2, 5.3 qt (5.0 L).

    How do I reset the oil life on a Cruze?

    Show the remaining oil life on the DIC and hold the select button until it reads 100%.

    Older Cruze? See the 2011–2015 Chevy Cruze oil type and capacity.

  • 2011–2013 Chevy Impala Oil Type and Capacity (3.5L, 3.9L, 3.6L V6)

    Quick answer: the 2012–2013 Chevy Impala 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 with a filter change. The 2011 Impala 3.5L and 3.9L V6 take 4.0 qt (3.8 L) of 5W-30.

    EngineOil capacity (with filter)Oil typeSpecification
    3.5L / 3.9L V6 (2011)4.0 qt (3.8 L)5W-30dexos1
    3.6L V6 (2012–2013)6.0 qt (5.7 L)5W-30dexos1
    Source: Chevrolet owner’s manuals (links below).

    The 2012 engine change added two quarts. The 3.6L V6 introduced in 2012 takes 6.0 qt, versus 4.0 qt for the older 3.5L and 3.9L. The 2014–2016 Impala Limited is this same car with the 3.6L.

    Oil capacity by year

    Model yearEngineCapacity
    20113.5L / 3.9L V64.0 qt (3.8 L)
    20123.6L V66.0 qt (5.7 L)
    20133.6L V66.0 qt (5.7 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    All engines: SAE 5W-30 dexos1; the manuals warn against 10W-30, 10W-40 and 20W-50 and allow 0W-30 below -20°F (-29°C).

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2011–2013 Chevy Impala

    See also: Oil life reset by brand.

    1. Display the remaining oil life on the Driver Information Center (DIC).
    2. Press and hold the select button (or SET/CLR) for several seconds until the oil life shows 100%.

    Reset only after an oil change; the system will not reset itself.

    Oil change tips

    • The 3.6L needs a 5-quart jug plus one quart.
    • Add a little less than the full capacity, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2012–2013 Impala take?

    6.0 qt (5.7 L) of SAE 5W-30 for the 3.6L V6.

    How much oil does a 2011 Impala take?

    4.0 qt (3.8 L) for the 3.5L and 3.9L V6.

    What oil does an Impala 3.6 use?

    SAE 5W-30 dexos1.

    Does the Impala Limited use the same oil?

    Yes, the 2014–2016 Impala Limited is the same car with the 3.6L V6.

    How do I reset the oil life on an Impala?

    Show the remaining oil life on the DIC and hold the select button until it reads 100%.

    Newer Impala? See the 2014–2020 Chevy Impala oil type and capacity.

  • 2011–2015 Chevy Cruze Oil Type and Capacity (1.4L Turbo, 1.8L, 2.0L Diesel)

    Quick answer: the 2011–2015 Chevy Cruze 1.4L turbo takes 4.25 qt (4.0 L) of SAE 5W-30 with a filter change. The 1.8L takes 4.76 qt (4.5 L) in the 2011–2012 manuals and 4.25 qt (4.0 L) from 2013. The 2014–2015 2.0L Clean Turbo Diesel takes 4.75 qt (4.5 L).

    EngineOil capacity (with filter)Oil typeSpecification
    1.4L turbo4.25 qt (4.0 L)5W-30dexos1
    1.8L (2011–2012)4.76 qt (4.5 L)5W-30dexos1
    1.8L (2013–2015)4.25 qt (4.0 L)5W-30dexos1
    2.0L diesel (2014–2015)4.75 qt (4.5 L)5W-30dexos2
    Source: Chevrolet owner’s manuals (links below).

    5W-30 is the grade for every first-generation Cruze. The manuals call 5W-30 the best grade and warn against 10W-30, 10W-40 and 20W-50. The 1.8L capacity dropped from 4.76 qt to 4.25 qt in the 2013 manual. The 2016 Cruze Limited is this same car; use these figures for it.

    Oil capacity by year

    Model year1.4L turbo1.8L2.0L diesel
    20114.25 qt (4.0 L)4.76 qt (4.5 L)—
    20124.25 qt (4.0 L)4.76 qt (4.5 L)—
    20134.25 qt (4.0 L)4.25 qt (4.0 L)—
    20144.25 qt (4.0 L)4.25 qt (4.0 L)4.75 qt (4.5 L)
    20154.25 qt (4.0 L)4.25 qt (4.0 L)4.75 qt (4.5 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    1.4L turbo and 1.8L: SAE 5W-30 dexos1; 0W-30 below -20°F (-29°C) (the 2014 manual says 0W-20 may be used in extreme cold).

    2.0L diesel: SAE 5W-30 diesel oil meeting dexos2.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2011–2015 Chevy Cruze

    See also: Oil life reset by brand.

    1. Display the remaining oil life on the Driver Information Center (DIC).
    2. Press and hold the select button (or SET/CLR) for several seconds until the oil life shows 100%.

    Reset only after an oil change; the system will not reset itself.

    Oil change tips

    • A 5-quart jug covers one change on any engine.
    • Add a little less than the full capacity, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2011–2015 Cruze take?

    4.25 qt (4.0 L) for the 1.4L turbo; 4.76 qt (2011–2012) or 4.25 qt (2013–2015) for the 1.8L.

    What oil does a Chevy Cruze 1.4 turbo use?

    SAE 5W-30 dexos1.

    Can I use 0W-20 in a 2011–2015 Cruze?

    Only in extreme cold per the 2014 manual; 5W-30 is the recommended grade.

    What oil does the Cruze diesel use?

    SAE 5W-30 meeting dexos2, 4.75 qt (4.5 L).

    How do I reset the oil life on a Cruze?

    Show the remaining oil life on the DIC and hold the select button until it reads 100%.

    Newer Cruze? See the 2016–2019 Chevy Cruze oil type and capacity.

  • 2024–2025 Chevy Trax Oil Type and Capacity (1.2L Turbo)

    Quick answer: the redesigned 2024–2025 Chevy Trax 1.2L turbo takes 4.2 qt (4.0 L) of oil with a filter change. The 2024 manual lists SAE 5W-30 and the 2025 manual lists SAE 0W-20.

    EngineOil capacity (with filter)Oil typeSpecification
    1.2L turbo 3-cylinder (2024)4.2 qt (4.0 L)5W-30dexos1
    1.2L turbo 3-cylinder (2025)4.2 qt (4.0 L)0W-20dexos1
    Source: Chevrolet owner’s manuals (links below).

    The two manuals disagree on grade. Same capacity both years, but the 2024 manual says 5W-30 (0W-30 in extreme cold) and the 2025 manual says 0W-20. Use the grade printed in your own manual or on the oil fill cap.

    Oil capacity by year

    Model yearCapacityOil
    20244.2 qt (4.0 L)5W-30
    20254.2 qt (4.0 L)0W-20

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    2024: SAE 5W-30 dexos1.

    2025: SAE 0W-20 dexos1.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2024–2025 Chevy Trax

    See also: Oil life reset by brand.

    1. Base cluster: display REMAINING OIL LIFE on the DIC and press and hold the select button while it is shown, until it reads 100%.
    2. Uplevel (2025): with the vehicle in P (Park), go to Vehicle Status > Maintenance > Oil Life > Reset on the infotainment screen and confirm. In the 2024 manual, uplevel models use the thumbwheel instead.

    Oil change tips

    • A 5-quart jug covers one change.
    • Add about 4 quarts, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2024–2025 Trax take?

    4.2 qt (4.0 L) with a filter change.

    What oil does a 2024 Trax use?

    The 2024 manual lists SAE 5W-30 dexos1.

    What oil does a 2025 Trax use?

    The 2025 manual lists SAE 0W-20 dexos1.

    Why do the manuals differ?

    GM changed the printed grade between model years; follow your manual and the oil fill cap.

    How do I reset the oil life on a 2025 Trax?

    Base cluster: hold the select button on the oil life display. Uplevel: Vehicle Status > Maintenance > Oil Life > Reset.

    Older Trax? See the 2015–2022 Chevy Trax oil type and capacity.

  • 2018–2025 Chevy Traverse Oil Type and Capacity (3.6L V6, 2.0L and 2.5L Turbo)

    Quick answer: the 2018–2024 Chevy Traverse 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 with a filter change; the 2018–2020 2.0L turbo takes 5.0 qt (4.7 L) of 5W-30. The redesigned 2025 Traverse 2.5L turbo takes 5.5 qt (5.2 L) of SAE 0W-20.

    EngineOil capacity (with filter)Oil typeSpecification
    3.6L V6 (2018–2024)6.0 qt (5.7 L)5W-30dexos1
    2.0L turbo (2018–2020)5.0 qt (4.7 L)5W-30dexos1
    2.5L turbo (2025)5.5 qt (5.2 L)0W-20dexos1
    Source: Chevrolet owner’s manuals (links below).

    The 2025 Traverse changed engine and oil. Through 2024 (including the 2024 Traverse Limited) the manuals list 5W-30. The 2025 manual lists a 2.5L turbo with 5.5 qt of 0W-20. Do not carry 5W-30 over to a 2025.

    Oil capacity by year

    Model year2.0L turbo3.6L V62.5L turbo
    20185.0 qt (4.7 L)6.0 qt (5.7 L)—
    20195.0 qt (4.7 L)6.0 qt (5.7 L)—
    20205.0 qt (4.7 L)6.0 qt (5.7 L)—
    2021—6.0 qt (5.7 L)—
    2022—6.0 qt (5.7 L)—
    2023—6.0 qt (5.7 L)—
    2024—6.0 qt (5.7 L)—
    2025——5.5 qt (5.2 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    3.6L V6 and 2.0L turbo: SAE 5W-30 dexos1; 0W-30 below -20°F (-29°C).

    2.5L turbo (2025): SAE 0W-20 dexos1.

    The 2024 figures come from the 2024 Traverse Limited manual (the carryover model).

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2018–2025 Chevy Traverse

    See also: Oil life reset by brand.

    2018–2024 (2020 manual): display OIL LIFE REMAINING on the DIC and press and hold the select button for several seconds until it shows 100%.

    2025 manual:

    1. Place the vehicle in P (Park).
    2. On the infotainment home screen select Vehicle Status > Maintenance > Oil Life > Reset.
    3. Select Reset again to confirm. The percentage changes to 100%.

    Oil change tips

    • One 5-quart jug plus one quart covers the V6; the 2025 2.5L turbo needs 5.5 quarts.
    • Add a little less than the full capacity, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2018–2024 Traverse take?

    6.0 qt (5.7 L) for the 3.6L V6 and 5.0 qt (4.7 L) for the 2018–2020 2.0L turbo, with a filter change.

    What oil does a 3.6 V6 Traverse use?

    SAE 5W-30 dexos1.

    How much oil does a 2025 Traverse take?

    5.5 qt (5.2 L) of SAE 0W-20 for the 2.5L turbo.

    Does the 2025 Traverse use 0W-20?

    Yes, the 2025 manual lists SAE 0W-20.

    How do I reset the oil life on a 2025 Traverse?

    Infotainment home screen: Vehicle Status > Maintenance > Oil Life > Reset, then confirm.

    Older Traverse? See the 2014–2017 Chevy Traverse oil type and capacity.

  • 2015–2022 Chevy Trax Oil Type and Capacity (1.4L Turbo)

    Quick answer: the 2015–2022 Chevy Trax 1.4L turbo takes 4.2 qt (4.0 L) of oil with a filter change. The grade depends on the engine version: SAE 5W-30 for the LUV 1.4L (VIN code B) and SAE 0W-20 for the LE2 1.4L (VIN code M). The 2022 manual lists 0W-20 only.

    EngineOil capacity (with filter)Oil typeSpecification
    1.4L turbo (LUV, VIN B)4.2 qt (4.0 L)5W-30dexos1
    1.4L turbo (LE2, VIN M), 2019–20224.2 qt (4.0 L)0W-20dexos1
    Source: Chevrolet owner’s manuals (links below).

    Check the 8th digit of your VIN. The 2021 manual gives two grades: 0W-20 for the LE2 engine (VIN M) and 5W-30 for the LUV engine (VIN B). The 2015–2018 and 2020 manuals list 5W-30; the 2022 manual lists 0W-20. The manuals also print a 1.8L at 4.8 qt (4.5 L).

    Oil capacity by year

    Model yearCapacityOil
    20154.2 qt (4.0 L)5W-30
    20164.2 qt (4.0 L)5W-30
    20174.2 qt (4.0 L)5W-30
    20184.2 qt (4.0 L)5W-30
    20194.2 qt (4.0 L)5W-30 (LUV) / 0W-20 (LE2)
    20204.2 qt (4.0 L)5W-30
    20214.2 qt (4.0 L)5W-30 (LUV) / 0W-20 (LE2)
    20224.2 qt (4.0 L)0W-20

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    1.4L LUV turbo: SAE 5W-30 dexos1; 0W-30 below -20°F (-29°C).

    1.4L LE2 turbo: SAE 0W-20 dexos1.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2015–2022 Chevy Trax

    See also: Oil life reset by brand.

    From the 2018 manual (base cluster):

    1. Press MENU to show Remaining Oil Life.
    2. Press SET/CLR while the oil life display is active. After a few seconds it resets to 100%.

    Reset only after an oil change.

    Oil change tips

    • A 5-quart jug covers one change with some left over.
    • Add about 4 quarts, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2015–2022 Trax take?

    4.2 qt (4.0 L) with a filter change.

    What oil does a Chevy Trax 1.4 turbo use?

    SAE 5W-30 for the LUV engine (VIN B) and SAE 0W-20 for the LE2 engine (VIN M).

    How do I know which 1.4L engine I have?

    Check the 8th character of the VIN: B is the LUV, M is the LE2 (2021 manual).

    What oil does the 2022 Trax use?

    SAE 0W-20 dexos1.

    How do I reset the oil life on a Trax?

    Show Remaining Oil Life and press SET/CLR (or hold the select button) until it reads 100%.

    Newer Trax? See the 2024–2025 Chevy Trax oil type and capacity.

  • 2014–2017 Chevy Traverse Oil Type and Capacity (3.6L V6)

    Quick answer: the 2014–2017 Chevy Traverse 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 dexos1 oil with a filter change.

    EngineOil capacity (with filter)Oil typeSpecification
    3.6L V66.0 qt (5.7 L)5W-30dexos1
    Source: Chevrolet owner’s manuals (links below).

    Only 5W-30. The 2014 manual calls 5W-30 the best grade and warns against 10W-30, 10W-40 or 20W-50. SAE 0W-30 may be used where it gets colder than -20°F (-29°C).

    Oil capacity by year

    Model yearCapacityOil
    20146.0 qt (5.7 L)5W-30
    20156.0 qt (5.7 L)5W-30
    20166.0 qt (5.7 L)5W-30
    20176.0 qt (5.7 L)5W-30

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    3.6L V6: SAE 5W-30 meeting dexos1; 0W-30 in extreme cold.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2014–2017 Chevy Traverse

    See also: Oil life reset by brand.

    From the 2016 manual, for vehicles without DIC buttons:

    1. Turn the ignition to ON/RUN with the engine off; the vehicle must be in P (Park).
    2. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
    3. Press and hold the stem until it shows 100% and three chimes sound.
    4. Turn the key to LOCK/OFF.

    With DIC buttons, show OIL LIFE REMAINING and hold the select button until it reads 100%.

    Oil change tips

    • One 5-quart jug plus one quart covers a change.
    • Add a little less than the full capacity, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2014–2017 Traverse take?

    6.0 qt (5.7 L) with a filter change.

    What oil does a 2014–2017 Traverse use?

    SAE 5W-30 meeting dexos1.

    Can I use 0W-20 in a Traverse 3.6?

    No. The manuals list 5W-30, with 0W-30 allowed only in extreme cold.

    Can I use 10W-30?

    The 2014 manual says not to use 10W-30, 10W-40 or 20W-50.

    How do I reset the oil life on a Traverse?

    Show OIL LIFE REMAINING and hold the reset stem or select button until it reads 100%.

    Newer Traverse? See the 2018–2025 Chevy Traverse oil type and capacity.

  • 2015–2022 Chevy Colorado Oil Type and Capacity (2.5L, 3.6L V6, 2.8L Diesel)

    Quick answer: the 2015–2022 Chevy Colorado 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 with a filter change. The 2.5L 4-cylinder takes 5.0 qt (4.7 L): 5W-20 in the 2015–2018 manuals and 0W-20 from 2019. The 2.8L Duramax diesel takes 6.0 qt (5.6 L) of 5W-30.

    EngineOil capacity (with filter)Oil typeSpecification
    2.5L 4-cylinder5.0 qt (4.7 L)5W-20 (2015–2018), 0W-20 (2019–2022)dexos1
    3.6L V66.0 qt (5.7 L)5W-30dexos1
    2.8L Duramax diesel6.0 qt (5.6 L)5W-30GM diesel spec (see supplement)
    Source: Chevrolet owner’s manuals (links below).

    The 2.5L switched to 0W-20 in 2019. Earlier manuals list 5W-20 for the 2.5L; from 2019 they list 0W-20. The V6 stays on 5W-30 in every year. The 2017 manual also prints a separate ZR2 line of 5.8 qt (5.5 L).

    Oil capacity by year

    Model year2.5L3.6L V62.8L diesel
    20155.0 qt (4.7 L)6.0 qt (5.7 L)—
    20165.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20175.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20185.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20195.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20205.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20215.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20225.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    2.5L: SAE 5W-20 (2015–2018) or SAE 0W-20 (2019–2022), dexos1.

    3.6L V6: SAE 5W-30 dexos1; 0W-30 below -20°F (-29°C).

    2.8L Duramax diesel: SAE 5W-30; 0W-40 may be used in extreme cold (2021 Duramax 2.8L supplement).

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2015–2022 Chevy Colorado

    See also: Oil life reset by brand.

    1. Display the remaining oil life on the Driver Information Center (DIC).
    2. Press and hold the select button (or SET/CLR) for several seconds until the oil life shows 100%.

    Reset only after an oil change; the system will not reset itself.

    Oil change tips

    • A 5-quart jug covers the 2.5L; the V6 and diesel need one more quart.
    • Add a little less than the full capacity, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2015–2022 Colorado take?

    5.0 qt (4.7 L) for the 2.5L, 6.0 qt (5.7 L) for the 3.6L V6 and 6.0 qt (5.6 L) for the 2.8L diesel, with a filter change.

    What oil does a 3.6 V6 Colorado use?

    SAE 5W-30 dexos1.

    What oil does a 2.5L Colorado use?

    5W-20 in the 2015–2018 manuals and 0W-20 from 2019.

    What oil does the Duramax 2.8 use?

    SAE 5W-30, 6.0 qt (5.6 L), per the diesel supplement.

    How do I reset the oil life on a Colorado?

    Show OIL LIFE REMAINING on the DIC and hold the select button until it reads 100%.

    Newer Colorado? See the 2023–2025 Chevy Colorado oil type and capacity.

  • 2023–2025 Chevy Colorado Oil Type and Capacity (2.7L Turbo)

    Quick answer: the 2023–2025 Chevy Colorado 2.7L turbo takes 6.0 qt (5.7 L) of SAE 5W-30 dexos1 oil with a filter change.

    EngineOil capacity (with filter)Oil typeSpecification
    2.7L turbo 4-cylinder (all outputs)6.0 qt (5.7 L)5W-30dexos1
    Source: Chevrolet owner’s manuals (links below).

    One engine, one answer. The redesigned 2023 Colorado uses only the 2.7L turbo, in different power levels. All three manuals list 6.0 qt of 5W-30; 0W-30 is allowed below -20°F (-29°C).

    Oil capacity by year

    Model yearCapacityOil
    20236.0 qt (5.7 L)5W-30
    20246.0 qt (5.7 L)5W-30
    20256.0 qt (5.7 L)5W-30

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    2.7L turbo: SAE 5W-30 meeting dexos1; SAE 0W-30 may be used below -20°F (-29°C).

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2023–2025 Chevy Colorado

    See also: Oil life reset by brand.

    1. Display OIL LIFE REMAINING on the DIC. Without DIC buttons, the truck must be in P (Park).
    2. Press and hold the select button on the DIC, or SET/CLR on the turn signal lever if there are no DIC buttons, for several seconds until the oil life changes to 100%.

    Steps from the 2023 manual. Reset only after an oil change.

    Oil change tips

    • A 5-quart jug plus one quart covers one change.
    • Add a little less than the full capacity, check the dipstick, then top up.

    Sources and how we checked

    All capacities and oil grades on this page come from Chevrolet’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2023–2025 Colorado take?

    6.0 qt (5.7 L) with a filter change.

    What oil does the 2.7 turbo Colorado use?

    SAE 5W-30 meeting dexos1.

    Can I use 0W-20 in a 2023 Colorado?

    The manuals specify 5W-30, with 0W-30 allowed only in extreme cold.

    Does the ZR2 take different oil?

    No. Every 2023–2025 Colorado uses the 2.7L turbo with the same capacity and grade.

    How do I reset the oil life on a 2023+ Colorado?

    Show OIL LIFE REMAINING on the DIC and hold the select button (or SET/CLR on the turn signal lever) until it reads 100%.

    Older Colorado? See the 2015–2022 Chevy Colorado oil type and capacity.