Car Oil Specs

Category: Jeep

  • 2015–2023 Jeep Renegade Oil Type and Capacity (2.4L, 1.4T, 1.3T)

    Quick answer: the Jeep Renegade 2.4L takes 5.5 qt (5.2 L) of SAE 0W-20 with a filter change. The 1.4L turbo (2015–2018) takes 4.0 qt (3.8 L) of 5W-40 synthetic, and the 1.3L turbo (2019+) takes 4.8 qt (4.5 L) of 0W-30 synthetic.

    EngineOil capacity (with filter)Oil type
    2.4L Tigershark5.5 qt (5.2 L)0W-20 (MS-6395)
    1.4L MultiAir turbo (2015–2018)4.0 qt (3.8 L)5W-40 synthetic (MS-12991)
    1.3L turbo (2019–2023)4.8 qt (4.5 L)0W-30 synthetic (MS-13340)
    Source: FCA owner’s manuals (links below).

    Turbo engines use synthetic oil of a different grade.

    Oil capacity by year

    Model year2.4L1.4L turbo1.3L turbo
    20155.5 qt4.0 qt—
    20185.5 qt4.0 qt—
    20205.5 qt—4.8 qt
    2023——4.8 qt
    — = not listed in that manual.

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    2.4L: API Certified SAE 0W-20 meeting FCA Material Standard MS-6395.

    1.4L turbo: SAE 5W-40 synthetic meeting MS-12991.

    1.3L turbo: SAE 0W-30 synthetic (API SN PLUS) meeting MS-13340.

    How to reset the oil change light on the 2015–2023 Jeep Renegade

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • One 5-quart jug covers any engine.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a Jeep Renegade take?

    5.5 qt (5.2 L) for the 2.4L, 4.0 qt (3.8 L) for the 1.4T and 4.8 qt (4.5 L) for the 1.3T.

    What oil does a Renegade 2.4 use?

    SAE 0W-20 meeting MS-6395.

    What oil does the Renegade 1.3 turbo use?

    SAE 0W-30 synthetic meeting MS-13340.

    What oil does the 1.4 turbo use?

    SAE 5W-40 synthetic meeting MS-12991.

    How do I reset the oil light?

    Use the Oil Life menu in the cluster.

    See all Jeep oil capacities.

  • 2017–2025 Jeep Compass Oil Type and Capacity (2.4L and 2.0T)

    Quick answer: the 2017–2022 Jeep Compass 2.4L takes 5.5 qt (5.2 L) of SAE 0W-20 with a filter change. The 2023–2025 Compass 2.0L turbo takes 5 qt (4.7 L) of SAE 5W-30.

    EngineOil capacity (with filter)Oil type
    2.4L Tigershark (2017–2022)5.5 qt (5.2 L)0W-20 (MS-6395)
    2.0L turbo (2023–2025)5 qt (4.7 L)5W-30 (MS-13340)
    Second-generation Compass (MP). Source: FCA owner’s manuals (links below).

    2023 changed engine and oil.

    Oil capacity by year

    Model yearEngineOil capacityOil type
    20172.4L5.5 qt0W-20
    20192.4L5.5 qt0W-20
    20212.4L5.5 qt0W-20
    20232.0L turbo5 qt5W-30
    20252.0L turbo5 qt5W-30

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    2.4L: API Certified SAE 0W-20 meeting FCA Material Standard MS-6395.

    2.0L turbo: SAE 5W-30 meeting MS-13340.

    How to reset the oil change light on the 2017–2025 Jeep Compass

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • 2.4L: a 5-quart jug plus a half quart.
    • 2.0T: one 5-quart jug.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a 2017–2022 Jeep Compass take?

    5.5 qt (5.2 L) of 0W-20.

    How much oil does a 2023+ Compass take?

    5 qt (4.7 L) of 5W-30 for the 2.0L turbo.

    Is a 5-quart jug enough?

    For the 2.0T, yes; the 2.4L needs 5.5 quarts.

    Can I use 0W-20 in the 2.0 turbo?

    The manuals list 5W-30 meeting MS-13340.

    How do I reset the oil light?

    Use the Oil Life menu in the cluster.

    Older Compass? See the 2012–2016 Jeep Compass.

  • 2012–2016 Jeep Compass Oil Type and Capacity (2.0L and 2.4L)

    Quick answer: the 2012–2016 Jeep Compass 2.0L and 2.4L take 4.5 qt (4.26 L) of SAE 5W-20 with a filter change.

    EngineOil capacity (with filter)Oil type
    2.0L / 2.4L 4-cylinder4.5 qt (4.26 L)5W-20 (MS-6395)
    First-generation Compass (MK). Source: FCA owner’s manuals (links below).

    One 5-quart jug is enough.

    Oil capacity by year

    Model yearOil capacityOil type
    20124.5 qt (4.26 L)5W-20
    20144.5 qt (4.26 L)5W-20
    20164.5 qt (4.26 L)5W-20
    Same figures in the 2012, 2014 and 2016 manuals.

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    API Certified SAE 5W-20 meeting FCA Material Standard MS-6395.

    How to reset the oil change light on the 2012–2016 Jeep Compass

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • One 5-quart jug.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a 2012–2016 Jeep Compass take?

    4.5 qt (4.26 L) with a filter change.

    What oil does a 2012–2016 Compass use?

    API Certified SAE 5W-20 meeting MS-6395.

    Is it the same for the 2.0L and 2.4L?

    Yes.

    Is a 5-quart jug enough?

    Yes.

    How do I reset the oil light?

    With the ignition ON, press the accelerator slowly three times within 10 seconds.

    Newer Compass? See the 2017–2025 Jeep Compass.

  • 2014–2023 Jeep Cherokee Oil Type and Capacity (2.4L, 3.2L V6, 2.0T)

    Quick answer: the 2014–2023 Jeep Cherokee 2.4L takes 5.5 qt (5.2 L) of SAE 0W-20 with a filter change. The 3.2L V6 takes 6 qt (5.6 L) of SAE 5W-20, and the 2.0L turbo (2019+) takes 5 qt (4.7 L) of SAE 5W-30.

    EngineOil capacity (with filter)Oil type
    2.4L Tigershark 4-cylinder5.5 qt (5.2 L)0W-20 (MS-6395)
    3.2L Pentastar V66 qt (5.6 L)5W-20 (MS-6395)
    2.0L turbo (2019–2023)5 qt (4.7 L)5W-30 (MS-13340)
    Cherokee KL. Source: FCA owner’s manuals (links below).

    Three engines, three grades. Check the oil filler cap before buying oil.

    Oil capacity by year

    Model year2.4L3.2L V62.0L turbo
    20145.5 qt6 qt—
    20155.5 qt6 qt—
    20165.5 qt6 qt—
    20175.5 qt6 qt—
    20185.5 qt6 qt—
    20195.5 qt6 qt5 qt
    20205.5 qt6 qt5 qt
    20215.5 qt6 qt5 qt
    20225.5 qt6 qt5 qt
    20235.5 qt—5 qt
    — = engine not listed in that manual.

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    2.4L: API Certified SAE 0W-20 meeting FCA Material Standard MS-6395.

    3.2L V6: API Certified SAE 5W-20 meeting FCA Material Standard MS-6395.

    2.0L turbo: SAE 5W-30 (API SN PLUS) meeting MS-13340.

    How to reset the oil change light on the 2014–2023 Jeep Cherokee

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • 2.4L: a 5-quart jug plus one quart.
    • 3.2L: a 5-quart jug plus one quart.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a Jeep Cherokee 2.4 take?

    5.5 qt (5.2 L) of 0W-20 with a filter change.

    How much oil does a Cherokee 3.2 V6 take?

    6 qt (5.6 L) of 5W-20.

    What oil does the Cherokee 2.0 turbo use?

    SAE 5W-30 meeting MS-13340, 5 qt (4.7 L).

    Is a 5-quart jug enough?

    Only for the 2.0L turbo.

    How do I reset the oil light on a Cherokee?

    Use the Oil Life menu in the cluster, or press the accelerator slowly three times within 10 seconds with the ignition ON.

    See all Jeep oil capacities.

  • 2022–2025 Jeep Grand Cherokee and Grand Cherokee L Oil Type and Capacity

    Quick answer: the 2022–2025 Jeep Grand Cherokee and Grand Cherokee L 3.6L V6 take 5 qt (4.7 L) of SAE 0W-20 with a filter change. The 5.7L Hemi takes 7 qt (6.6 L), also 0W-20. The 2.0L turbo and 4xe take 5 qt of SAE 5W-30.

    EngineOil capacity (with filter)Oil type
    3.6L Pentastar V65 qt (4.7 L)0W-20 (MS-6395)
    5.7L Hemi V8 (2022–2024)7 qt (6.6 L)0W-20 (MS-6395)
    2.0L turbo / 2.0L 4xe hybrid5 qt (4.7 L)5W-30 (MS-13340)
    Grand Cherokee (WL) and Grand Cherokee L. Source: FCA owner’s manuals (links below).

    Less oil than the old 3.6L. The WL’s 3.6L takes 5 quarts, one less than the 2011–2021 Grand Cherokee.

    Oil capacity by year

    Model year3.6L5.7L2.0L turbo
    20225 qt7 qt5 qt
    20235 qt7 qt5 qt
    20245 qt7 qt5 qt
    20255 qt—5 qt
    — = not listed in the 2025 manual.

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    3.6L and 5.7L: API Certified SAE 0W-20 meeting FCA Material Standard MS-6395.

    2.0L turbo and 4xe: SAE 5W-30 meeting MS-13340.

    How to reset the oil change light on the 2022–2025 Jeep Grand Cherokee and Grand Cherokee L

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • 3.6L / 2.0T: one 5-quart jug.
    • 5.7L: a 5-quart jug plus two quarts.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a 2022+ Grand Cherokee take?

    5 qt (4.7 L) for the 3.6L and 2.0L turbo, 7 qt (6.6 L) for the 5.7L Hemi.

    What oil does a 2022+ Grand Cherokee use?

    0W-20 for the 3.6L and 5.7L; 5W-30 for the 2.0L turbo and 4xe.

    Does the Grand Cherokee L take the same oil?

    Yes, the manuals list the same figures.

    Is a 5-quart jug enough?

    Yes for the 3.6L and 2.0T.

    How do I reset the oil light?

    Use the Oil Life item in the cluster display.

    Older Grand Cherokee? See the 2011–2021 Jeep Grand Cherokee.

  • 2011–2021 Jeep Grand Cherokee WK2 Oil Type and Capacity (3.6L, 5.7L Hemi, SRT)

    Quick answer: the 2011–2021 Jeep Grand Cherokee 3.6L V6 takes 6 qt (5.6 L) of oil with a filter change and the 5.7L Hemi V8 takes 7 qt (6.6 L). Recent manuals list 0W-20 for the 3.6L (2016+) and 5W-20 for the 5.7L. The SRT 6.4L takes 7 qt and the Trackhawk 6.2L takes 8.3 qt of 0W-40 synthetic.

    EngineOil capacity (with filter)Oil type
    3.6L Pentastar V66 qt (5.6 L)5W-30 (2012), 5W-20 (2013–2015), 0W-20 (2016–2021)
    5.7L Hemi V87 qt (6.6 L)5W-20 (0W-20 in the 2018 manual)
    6.4L Hemi V8 (SRT)7 qt (6.6 L)0W-40 synthetic (MS-12633)
    6.2L supercharged (Trackhawk)8.3 qt (7.8 L)0W-40 synthetic (MS-12633)
    Grand Cherokee WK2. Source: FCA owner’s manuals and SRT supplements (links below).

    The 3.6L grade changed twice. 5W-30 in 2012, 5W-20 in 2013–2015 and 0W-20 from 2016. The capacity stayed at 6 quarts.

    Oil capacity by year

    Model year3.6L3.6L oil5.7L5.7L oil
    20126 qt (5.6 L)5W-307 qt (6.6 L)5W-20
    20136 qt (5.6 L)5W-207 qt (6.6 L)5W-20
    20146 qt (5.6 L)5W-207 qt (6.6 L)5W-20
    20156 qt (5.6 L)5W-207 qt (6.6 L)5W-20
    20166 qt (5.6 L)0W-207 qt (6.6 L)5W-20
    20176 qt (5.6 L)0W-207 qt (6.6 L)5W-20
    20186 qt (5.6 L)0W-207 qt (6.6 L)0W-20
    2019—0W-20—5W-20
    20206 qt (5.6 L)0W-207 qt (6.6 L)5W-20
    20216 qt (5.6 L)0W-207 qt (6.6 L)5W-20
    — = capacity not printed in that manual (grade only). The 2018 manual lists 0W-20 for the 5.7L; the 2017 and 2019–2021 manuals list 5W-20.

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    3.6L: API Certified SAE 0W-20 meeting FCA Material Standard MS-6395 from 2016 (5W-20 in 2013–2015, 5W-30 in 2012).

    5.7L Hemi: API Certified SAE 5W-20 meeting FCA Material Standard MS-6395.

    SRT 6.4L and Trackhawk 6.2L: SAE 0W-40 synthetic meeting MS-12633.

    How to reset the oil change light on the 2011–2021 Jeep Grand Cherokee WK2

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • 3.6L: a 5-quart jug plus one quart.
    • 5.7L: a 5-quart jug plus two quarts.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a Jeep Grand Cherokee 3.6 take?

    6 qt (5.6 L) with a filter change in 2011–2021 (WK2).

    How much oil does a Grand Cherokee 5.7 Hemi take?

    7 qt (6.6 L).

    What oil does a Grand Cherokee 3.6 use?

    0W-20 from 2016; 5W-20 in 2013–2015; 5W-30 in 2012.

    What oil does the SRT use?

    SAE 0W-40 synthetic, 7 qt (6.6 L).

    How much oil does a Trackhawk take?

    8.3 qt (7.8 L) of 0W-40 synthetic.

    Newer Grand Cherokee? See the 2022–2025 Jeep Grand Cherokee.

  • 2020–2025 Jeep Gladiator Oil Type and Capacity (3.6L and 3.0 Diesel)

    Quick answer: the 2020–2025 Jeep Gladiator 3.6L V6 takes 5 qt (4.7 L) of SAE 0W-20 with a filter change. The 3.0L EcoDiesel takes 9 qt (8.5 L) of 5W-40 full synthetic.

    EngineOil capacity (with filter)Oil type
    3.6L Pentastar V65 qt (4.7 L)0W-20 (MS-6395)
    3.0L EcoDiesel V69 qt (8.5 L)5W-40 full synthetic (MS-12991)
    Source: FCA owner’s manuals (links below).

    The diesel takes almost twice as much.

    Oil capacity by year

    Model year3.6L3.0L diesel
    20205 qt—
    20225 qt9 qt
    20245 qt—
    20255 qt—
    — = not listed in that manual. We read the 2020, 2022, 2024 and 2025 manuals.

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    3.6L: API Certified SAE 0W-20 meeting FCA Material Standard MS-6395.

    3.0L EcoDiesel: Mopar SAE 5W-40 full synthetic meeting MS-12991.

    How to reset the oil change light on the 2020–2025 Jeep Gladiator

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • 3.6L: one 5-quart jug.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a Jeep Gladiator take?

    5 qt (4.7 L) for the 3.6L V6 with a filter change.

    What oil does a Gladiator use?

    API Certified SAE 0W-20 meeting MS-6395.

    How much oil does the Gladiator EcoDiesel take?

    9 qt (8.5 L) of 5W-40 full synthetic.

    Is a 5-quart jug enough?

    Yes for the 3.6L.

    How do I reset the oil light?

    Use the Oil Life menu in the cluster, or press the accelerator slowly three times within 10 seconds with the ignition ON.

    Related: Jeep Wrangler JL.

  • 2018–2025 Jeep Wrangler JL Oil Type and Capacity (3.6L, 2.0T, 3.0 Diesel, 6.4L)

    Quick answer: the 2018–2025 Jeep Wrangler JL 3.6L V6 takes 5 qt (4.73 L) of SAE 0W-20 with a filter change. The 2.0L turbo also takes 5 qt, but of SAE 5W-30. The 3.0L EcoDiesel takes 9 qt (8.5 L) of 5W-40 synthetic and the 392 (6.4L) takes 7.5 qt (7.1 L) of 0W-40 synthetic.

    EngineOil capacity (with filter)Oil type
    3.6L Pentastar V65 qt (4.73 L)0W-20 (MS-6395)
    2.0L turbo (incl. 4xe)5 qt (4.73 L)5W-30 (MS-13340)
    3.0L EcoDiesel V6 (2021–2023 manuals)9 qt (8.5 L)5W-40 full synthetic (MS-12991)
    6.4L V8 392 (2024–2025 manuals)7.5 qt (7.1 L)0W-40 full synthetic (MS-A0921)
    Wrangler JL (not JK). Source: FCA owner’s manuals (links below).

    The JL takes less oil than the JK. The 3.6L dropped from 6 to 5 quarts and changed to 0W-20 with the 2018 JL.

    Oil capacity by year

    Model year3.6L2.0L turbo3.0L diesel
    20185 qt5 qt—
    20195 qt5 qt—
    20205 qt5 qt—
    20215 qt5 qt9 qt
    20225 qt5 qt9 qt
    20235 qt5 qt9 qt
    20245 qt5 qt—
    20255 qt5 qt—
    — = not listed in that year’s main owner’s manual. 2018 = JL manual.

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    3.6L: API Certified SAE 0W-20 meeting FCA Material Standard MS-6395.

    2.0L turbo: SAE 5W-30 meeting MS-13340.

    3.0L EcoDiesel: Mopar SAE 5W-40 full synthetic meeting MS-12991.

    6.4L (392): Mopar SAE 0W-40 full synthetic meeting MS-A0921.

    How to reset the oil change light on the 2018–2025 Jeep Wrangler JL

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • 3.6L / 2.0T: one 5-quart jug.
    • 392: a 5-quart jug plus 3 quarts.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a Jeep Wrangler JL take?

    5 qt (4.73 L) for the 3.6L V6 and the 2.0L turbo, with a filter change.

    What oil does a Wrangler JL 3.6 use?

    API Certified SAE 0W-20 meeting MS-6395.

    What oil does the Wrangler 2.0 turbo use?

    SAE 5W-30 meeting MS-13340.

    How much oil does the Wrangler 392 take?

    7.5 qt (7.1 L) of 0W-40 full synthetic (2024–2025 manuals).

    How much oil does the Wrangler EcoDiesel take?

    9 qt (8.5 L) of 5W-40 full synthetic.

    Older Wrangler? See the 2012–2018 Jeep Wrangler JK. Pickup: Jeep Gladiator.

  • 2012–2018 Jeep Wrangler JK Oil Type and Capacity (3.6L V6)

    Quick answer: the 2012–2018 Jeep Wrangler JK 3.6L V6 takes 6 qt (5.6 L) of oil with a filter change. The manuals specify SAE 5W-20 from 2013 and SAE 5W-30 in 2012, API Certified and meeting MS-6395.

    EngineOil capacity (with filter)Oil type
    3.6L Pentastar V66 qt (5.6 L)5W-20 (2013–2018); 5W-30 (2012)
    Wrangler and Wrangler Unlimited (JK). Source: FCA owner’s manuals (links below).

    2012 uses a different grade. The 2012 manual lists 5W-30; from 2013 the manuals list 5W-20 for the same capacity.

    Oil capacity by year

    Model yearOil capacityOil type
    20126 qt (5.6 L)5W-30
    20136 qt (5.6 L)5W-20
    20146 qt (5.6 L)5W-20
    20156 qt (5.6 L)5W-20
    20166 qt (5.6 L)5W-20
    20176 qt (5.6 L)5W-20
    20186 qt (5.6 L)5W-20
    2018 = Wrangler JK.

    We read the fluid capacities table and the engine fluids section of every manual listed under Sources.

    Recommended oil type

    API Certified SAE 5W-20 meeting FCA Material Standard MS-6395 (2013–2018 manuals); the 2012 manual lists SAE 5W-30. The manuals also say to check the grade printed on the oil filler cap.

    How to reset the oil change light on the 2012–2018 Jeep Wrangler JK

    See also: Oil life reset by brand.

    Most of these owner’s manuals describe two ways to reset the oil change indicator after an oil change: in the instrument cluster display, go to the Oil Life item and confirm Reset; or, with the ignition in ON/RUN and the engine off, fully press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Check your manual for the exact menu on your model.

    Oil change tips

    • Buy a 5-quart jug plus one quart.
    • The capacity is approximate. After refilling, run the engine briefly, turn it off, wait a few minutes and check that the level is in the safe range on the dipstick before adding more.

    Sources and how we checked

    All capacities and oil grades on this page come from the owner’s manuals published by FCA US (Stellantis) on Mopar’s official owner site (“Technical Specifications”: fluid capacities and engine fluids and lubricants):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 26, 2026.

    FAQ

    How much oil does a Jeep Wrangler JK take?

    6 qt (5.6 L) with a filter change for the 3.6L V6.

    What oil does a 2013–2018 Wrangler use?

    API Certified SAE 5W-20 meeting MS-6395.

    What oil does a 2012 Wrangler use?

    The 2012 manual lists SAE 5W-30.

    Is a 5-quart jug enough?

    No, the 3.6L takes 6 quarts.

    How do I reset the oil light on a Wrangler?

    With the ignition ON (engine off), press the accelerator fully and slowly three times within 10 seconds, or use the Oil Life menu in the cluster.

    Newer Wrangler? See the 2018–2025 Jeep Wrangler JL.