Quick answer: the 2013–2017 Honda Accord 2.4L four-cylinder takes 4.4 US qt (4.2 L) of oil with a filter change and the 3.5L V6 takes 4.5 US qt (4.3 L). Honda specifies 0W-20 for both engines in every model year.
| Engine | Oil capacity (with filter) | Without filter | Oil type |
|---|---|---|---|
| 2.4L 4-cylinder (CVT or manual) | 4.4 US qt (4.2 L) | 4.2 US qt (4.0 L) | 0W-20 |
| 3.5L V6 | 4.5 US qt (4.3 L) | 4.2 US qt (4.0 L) | 0W-20 |
Oil capacity by year
We checked the Specifications page of each year’s owner’s manual to confirm that nothing changed during the generation, including the 2016 facelift:
| Model year | 2.4L 4-cylinder | 3.5L V6 |
|---|---|---|
| 2013 | 4.4 US qt (4.2 L) | 4.5 US qt (4.3 L) |
| 2014 | 4.4 US qt (4.2 L) | 4.5 US qt (4.3 L) |
| 2015 | 4.4 US qt (4.2 L) | 4.5 US qt (4.3 L) |
| 2016 | 4.4 US qt (4.2 L) | 4.5 US qt (4.3 L) |
| 2017 | 4.4 US qt (4.2 L) | 4.5 US qt (4.3 L) |
In the manual, the 2.4L figure sits on the page that lists the CVT and manual transmission fluids, and the V6 figure on the page with the automatic transmission fluid, so it is easy to read the wrong one. The V6 needs about 0.1 quart more.
Recommended oil type
Every manual from 2013 to 2017 lists the same recommendation for both engines: Genuine Honda Motor Oil 0W-20 or an API premium-grade 0W-20 detergent oil. Any brand with the API Certification Seal and the 0W-20 grade meets Honda’s requirement.
Coming from an older Accord? The 2008–2010 Accord used 5W-20 and a smaller 4.2-quart change on the four-cylinder from 2010. Do not carry those numbers over to this generation. See the 2008–2012 Accord page.
How to reset the oil life (Maintenance Minder)
Honda’s manuals describe two procedures, depending on the controls in your car. Use the one that matches your dashboard.
Cars with a select/reset knob in the gauge cluster
- Turn the ignition switch to ON. You do not need to start the engine.
- Press the select/reset knob repeatedly until the engine oil life appears.
- Press and hold the knob for 10 seconds or more. The oil life and the maintenance codes blink.
- Press the knob again for 5 seconds or more. The codes disappear and oil life returns to 100%.
Cars with the steering-wheel menu (Vehicle Settings)
- Turn the ignition switch to ON. On cars with an ENGINE START/STOP button, set the power mode to ON.
- Scroll to Vehicle Settings with the steering-wheel button shown in your manual, then press SEL/RESET.
- Scroll until Maintenance Reset appears, then press SEL/RESET.
- Select Reset and press SEL/RESET. The maintenance items disappear and oil life returns to 100%.
Oil change tips
- Use the “with filter” number for a normal oil change: add about 4 quarts, wait a minute, check the dipstick, then top up.
- Do not fill above the upper mark on the dipstick. Honda warns that overfilling can damage the engine.
- One 5-quart jug covers a full change on either engine.
- There is no fixed mileage interval in the manual: follow the Maintenance Minder percentage.
Sources and how we checked
All capacities and oil grades on this page come from Honda’s owner’s manuals on Honda’s technical information server (techinfo.honda.com), Specifications section and Maintenance Minder section:
- 2013 Accord Sedan owner’s manual
- 2014 Accord Sedan owner’s manual
- 2015 Accord Sedan owner’s manual
- 2016 Accord Sedan owner’s manual
- 2017 Accord Sedan owner’s manual
If your owner’s manual shows something different, follow your manual and tell us so we can check it.
Last checked: October 20, 2026.
FAQ
How much oil does a 2013–2017 Honda Accord take?
The 2.4L four-cylinder takes 4.4 US quarts (4.2 L) and the 3.5L V6 takes 4.5 US quarts (4.3 L), both with a filter change. The figures are the same in every model year from 2013 to 2017.
What type of oil does a 2013–2017 Accord use?
Honda specifies Genuine Honda Motor Oil 0W-20 or an API premium-grade 0W-20 detergent oil for both engines.
How much oil without changing the filter?
4.2 US quarts (4.0 L) for both the 2.4L and the V6, according to the owner’s manuals.
How do I reset the oil life on a 2013–2017 Accord?
Turn the ignition ON and either hold the select/reset knob (about 10 seconds, then another 5 seconds) or, on cars with the steering-wheel menu, go to Vehicle Settings > Maintenance Reset and choose Reset. Both methods are explained step by step on this page.
Does the 2016 facelift change the oil specs?
No. The 2016 and 2017 owner’s manuals list the same 4.4 qt (2.4L) and 4.5 qt (V6) capacities and the same 0W-20 oil as 2013–2015.