Quick answer: the 2012–2017 Toyota Camry 2.5L 4-cylinder takes 4.6 US qt (4.4 L) of oil with a filter change, and the 3.5L V6 takes 6.4 US qt (6.1 L). Toyota recommends SAE 0W-20.
| Engine | Oil capacity (with filter) | Without filter | Oil type |
|---|---|---|---|
| 2.5L 4-cylinder (2AR-FE) | 4.6 US qt (4.4 L) | 4.2 US qt (4.0 L) | 0W-20 |
| 3.5L V6 (2GR-FE) | 6.4 US qt (6.1 L) | 6.0 US qt (5.7 L) | 0W-20 |
The V6 needs more than a 5-quart jug. With a new filter it takes 6.4 quarts, so buy two jugs or a jug plus 2 quarts.
Oil capacity by year
| Model year | 2.5L 4-cylinder | 3.5L V6 |
|---|---|---|
| 2012 | 4.6–4.7 US qt (4.4 L)* | 6.4 US qt (6.1 L) |
| 2013 | 4.6 US qt (4.4 L) | 6.4 US qt (6.1 L) |
| 2014 | 4.6 US qt (4.4 L) | 6.4 US qt (6.1 L) |
| 2015 | 4.6 US qt (4.4 L) | 6.4 US qt (6.1 L) |
| 2016 | 4.6 US qt (4.4 L) | 6.4 US qt (6.1 L) |
| 2017 | 4.6 US qt (4.4 L) | 6.4 US qt (6.1 L) |
We read the Specifications pages of all ten owner’s manuals Toyota publishes for these model years (some years have two manuals, split by production date). The liters, the engines and the oil grade are the same in every one.
Recommended oil type
Toyota’s manuals call for Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20, which they describe as the best choice for fuel economy and cold starts. If 0W-20 is not available you may use 5W-20, but it must be replaced with 0W-20 at the next oil change.
How to reset the maintenance required light on the 2012–2017 Toyota Camry
See also: Toyota maintenance required light reset for all models.
Toyota calls this resetting the maintenance data (U.S. models). Two procedures appear in the manuals; use the one that matches your instrument cluster.
Trip meter method (2012 owner’s manual)
- Turn the vehicle off with trip meter A displayed.
- While pressing the display change button, turn the engine switch to ON (or the ENGINE START STOP switch to IGNITION ON). Do not start the engine.
- Keep holding the button until the trip meter shows 000000.
Models with a multi-information display (2017 owner’s manual)
- With the engine running, switch the multi-information display to the Settings screen.
- Select Maintenance Reset.
- Select Yes. “Maintenance Reset Complete” appears when it is done.
Oil change tips
- 2.5L: one 5-quart jug covers a change with a new filter.
- 3.5L V6: have about 7 quarts on hand.
- Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.
What battery does the 2012–2017 Toyota Camry key fob take?
CR2032 for the smart key (push-button start) and CR2016 for the regular remote key. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.
| Model years | Key type | Battery |
|---|---|---|
| 2012–2017 | Smart key (keyless entry and push-button start) | CR2032 |
| 2012–2017 | Regular remote key (no smart key system) | CR2016 |
- You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
- Insert the new battery with the + terminal facing the way shown in the manual.
- Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
- A weak battery shows up as a shorter range or a key that works only up close.
Sources and how we checked
All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):
- 2012 Camry owner’s manual (through Dec. 2011 production)
- 2012 Camry owner’s manual (from June 2012 production)
- 2013 Camry owner’s manual
- 2014 Camry owner’s manual (through Nov. 2013 production)
- 2015 Camry owner’s manual
- 2016 Camry owner’s manual (through Mar. 2016 production)
- 2017 Camry owner’s manual
Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.
Last checked: October 21, 2026.
FAQ
How much oil does a 2012 Toyota Camry take?
A 2012 Toyota Camry 2.5L takes 4.6 US qt (4.4 L) of SAE 0W-20 with a filter change (the manuals for early-2012 cars print 4.7 qt). The 3.5L V6 takes 6.4 US qt (6.1 L).
How many quarts of oil does a 2017 Toyota Camry take?
4.6 US qt (4.4 L) for the 2.5L 4-cylinder and 6.4 US qt (6.1 L) for the 3.5L V6, both with a new filter and SAE 0W-20.
How much oil does a 2012–2017 Toyota Camry take?
The 2.5L 4-cylinder takes 4.6 US quarts (4.4 L) with a filter change and the 3.5L V6 takes 6.4 US quarts (6.1 L).
What oil does a 2012–2017 Camry use?
Toyota recommends SAE 0W-20 for both engines. If 0W-20 is not available, the manuals allow 5W-20, but it must be replaced with 0W-20 at the next oil change.
Why do some sources say 4.7 quarts for the 2012 Camry?
The early 2012 Camry manuals print 4.7 qt for the 2.5L, while later manuals print 4.6 qt. Both list the same 4.4 liters; it is a rounding difference.
How much oil without changing the filter?
4.2 US quarts (4.0 L) for the 2.5L and 6.0 US quarts (5.7 L) for the V6.
How do I reset the maintenance light on a 2012–2017 Camry?
With trip meter A shown, turn the vehicle off, then hold the display button while turning it to ON and keep holding until the trip meter shows 000000. Models with a multi-information display can also use Settings, Maintenance Reset, Yes.
Newer Camry? See the 2018–2024 Toyota Camry oil type and capacity.