Car Oil Specs

Category: Toyota

  • 2025 Toyota Camry Oil Type and Capacity (2.5L Hybrid)

    Quick answer: the 2025 Toyota Camry 2.5L hybrid takes 4.5 US qt (4.3 L) of oil with a filter change. Toyota recommends SAE 0W-8 (JASO GLV-1).

    EngineOil capacity (with filter)Without filterOil type
    2.5L hybrid (A25A-FXS)4.5 US qt (4.3 L)4.2 US qt (4.0 L)0W-8
    Ninth-generation Camry, hybrid only (FWD and AWD). Source: 2025 Toyota owner’s manual (link below).

    New oil grade: 0W-8. The 2018–2024 Camry used 0W-16 or 0W-20. If 0W-8 is not available, 0W-16 may be used, but it must be replaced with 0W-8 at the next oil change.

    Oil capacity by year

    Model yearOil capacity (with filter)Oil type
    20254.5 US qt (4.3 L)0W-8

    We read the Specifications pages of the 2025 Camry Hybrid owner’s manual.

    Recommended oil type

    Toyota Genuine Motor Oil or equivalent with the JASO GLV-1 grade and SAE 0W-8 viscosity. If 0W-8 is not available, 0W-16 may be used, but it must be replaced with 0W-8 at the next oil change.

    Look for the JASO GLV-1 mark on the bottle: regular API/ILSAC 0W-20 oils do not carry it.

    How to reset the maintenance required light on the 2025 Toyota Camry

    See also: Toyota maintenance required light reset for all models.

    Toyota’s manuals for these years use the settings menu of the multi-information display.

    1. With the power switch ON, use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
    2. Select Vehicle Settings.
    3. Select Scheduled Maintenance.
    4. Select Yes. A message confirms that the reset is complete.

    Oil change tips

    • A 5-quart jug covers one change with a new filter.
    • 0W-8 is still uncommon at parts stores: check stock before the oil change.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    Sources and how we checked

    All capacities and oil grades on this page come from Toyota’s owner’s manuals, downloaded from Toyota’s official publications server (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: November 5, 2026.

    FAQ

    How much oil does a 2025 Toyota Camry take?

    4.5 US quarts (4.3 L) with a filter change.

    What oil does the 2025 Camry use?

    SAE 0W-8 with the JASO GLV-1 grade. If it is not available, 0W-16 may be used, but it must be replaced with 0W-8 at the next oil change.

    Can I use 0W-20 in a 2025 Camry?

    The manual does not list 0W-20; it lists 0W-8, or 0W-16 as a temporary alternative.

    How much oil without changing the filter?

    4.2 US quarts (4.0 L).

    Is a 5-quart jug enough?

    Yes.

    Older Camry? See the 2018–2024 Toyota Camry oil type and capacity.

  • 2021–2025 Toyota Sienna Oil Type and Capacity (2.5L Hybrid)

    Quick answer: the 2021–2023 Toyota Sienna 2.5L hybrid takes 4.8 US qt (4.5 L) of oil with a filter change, and the 2024–2025 Sienna takes 4.5 US qt (4.3 L). Toyota recommends SAE 0W-16.

    EngineOil capacity (with filter)Without filterOil type
    2.5L hybrid (A25A-FXS), 2021–20234.8 US qt (4.5 L)4.4 US qt (4.2 L)0W-16
    2.5L hybrid (A25A-FXS), 2024–20254.5 US qt (4.3 L)4.2 US qt (4.0 L)0W-16
    Fourth-generation Sienna, hybrid only (FWD and AWD). Source: Toyota owner’s manuals (links below).

    The capacity went down in 2024. The 2024 and 2025 manuals list 4.5 quarts with a filter, against 4.8 quarts in 2021–2023. Same engine, so use the figure for your model year.

    Oil capacity by year

    Model yearOil capacity (with filter)Without filter
    20214.8 US qt (4.5 L)4.4 US qt (4.2 L)
    20224.8 US qt (4.5 L)4.4 US qt (4.2 L)
    20234.8 US qt (4.5 L)4.4 US qt (4.2 L)
    20244.5 US qt (4.3 L)4.2 US qt (4.0 L)
    20254.5 US qt (4.3 L)4.2 US qt (4.0 L)

    We read the Specifications pages of the Sienna owner’s manuals for 2021, 2022, 2023, 2024 and 2025. The 2023 and 2024 short-version manuals give the same figures.

    Recommended oil type

    Toyota Genuine Motor Oil or equivalent in SAE 0W-16. If 0W-16 is not available, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

    How to reset the maintenance required light on the 2021–2025 Toyota Sienna

    See also: Toyota maintenance required light reset for all models.

    Toyota’s manuals for these years use the settings menu of the multi-information display.

    1. With the power switch ON, use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
    2. Select Vehicle Settings.
    3. Select Scheduled Maintenance.
    4. Select Yes. A message confirms that the reset is complete.

    Oil change tips

    • A 5-quart jug covers one change with a new filter.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    Sources and how we checked

    All capacities and oil grades on this page come from Toyota’s owner’s manuals, downloaded from Toyota’s official publications server (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: November 5, 2026.

    FAQ

    How much oil does a 2021–2025 Toyota Sienna take?

    4.8 US quarts (4.5 L) for 2021–2023 and 4.5 US quarts (4.3 L) for 2024–2025, with a filter change.

    What oil does the Sienna hybrid use?

    SAE 0W-16. If it is not available, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

    Why does the 2024 Sienna take less oil?

    The 2024 and 2025 manuals list a lower reference capacity for the same 2.5L hybrid engine. Always finish by checking the dipstick.

    How much oil without changing the filter?

    4.4 quarts (4.2 L) for 2021–2023 and 4.2 quarts (4.0 L) for 2024–2025.

    Is a 5-quart jug enough?

    Yes, for every model year from 2021 to 2025.

    Older Sienna? See the 2012–2020 Toyota Sienna oil type and capacity.

  • 2010–2013 Toyota Corolla Oil Type and Capacity (1.8L and 2.4L)

    Quick answer: the 2010–2013 Toyota Corolla 1.8L takes 4.4 US qt (4.2 L) of oil with a filter change, and the 2.4L takes 4.0 US qt (3.8 L). Toyota recommends SAE 0W-20.

    EngineOil capacity (with filter)Without filterOil type
    1.8L 4-cylinder (2ZR-FE)4.4 US qt (4.2 L)4.1 US qt (3.9 L)0W-20
    2.4L 4-cylinder (2AZ-FE)4.0 US qt (3.8 L)3.8 US qt (3.6 L)0W-20
    Source: Toyota owner’s manuals (links below).

    The bigger engine takes less oil. The 2.4L takes 4.0 quarts with a filter, less than the 4.4 quarts of the 1.8L. Check which engine you have before you pour.

    Oil capacity by year

    Model year1.8L2.4L
    20104.4 US qt (4.2 L)4.0 US qt (3.8 L)
    20114.4 US qt (4.2 L)*4.0 US qt (3.8 L)*
    20124.4 US qt (4.2 L)4.0 US qt (3.8 L)
    20134.4 US qt (4.2 L)4.0 US qt (3.8 L)
    * Toyota does not publish a separate 2011 manual on its site; the 2010 and 2012 manuals list the same engines and figures.

    We read the Specifications pages of the 2010, 2012 and 2013 Corolla owner’s manuals.

    Recommended oil type

    Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20. The 2012 and 2013 manuals add that if 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

    How to reset the maintenance required light on the 2010–2013 Toyota Corolla

    See also: Toyota maintenance required light reset for all models.

    This is the procedure in the 2013 Corolla owner’s manual (U.S. models).

    1. Turn the engine switch off with trip meter A displayed.
    2. While pressing the trip meter reset button, turn the engine switch on.
    3. Keep holding the button until the trip meter shows 000000.

    Oil change tips

    • A 5-quart jug covers one change on either engine.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    What battery does the 2010–2013 Toyota Corolla key fob take?

    CR1632 if the car has the smart key system (push-button start). Regular remote keys take a CR2025 (type A) or a CR2016 (type B); the manual shows both remote designs, so compare your key or check the battery when you open it. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

    Model yearsKey typeBattery
    2010–2013Smart key (keyless entry and push-button start)CR1632
    2010–2013Regular remote key, type ACR2025
    2010–2013Regular remote key, type BCR2016
    • You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
    • Insert the new battery with the + terminal facing the way shown in the manual.
    • Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
    • A weak battery shows up as a shorter range or a key that works only up close.

    Sources and how we checked

    All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 21, 2026.

    FAQ

    How much oil does a 2010 Toyota Corolla take?

    A 2010 Toyota Corolla with the 1.8L engine takes 4.4 US qt (4.2 L) of SAE 0W-20 with a filter change. With the 2.4L engine it takes 4.0 US qt (3.8 L).

    What oil does a 2013 Toyota Corolla take?

    SAE 0W-20. The 2013 Corolla 1.8L takes 4.4 US qt (4.2 L) with a new filter, and the 2.4L takes 4.0 US qt (3.8 L).

    How much oil does a 2010–2013 Toyota Corolla take?

    4.4 US quarts (4.2 L) for the 1.8L and 4.0 US quarts (3.8 L) for the 2.4L, with a filter change.

    What oil does a 2010–2013 Corolla use?

    SAE 0W-20. The 2012–2013 manuals allow 5W-20 if 0W-20 is not available, to be replaced with 0W-20 at the next change.

    How much oil without changing the filter?

    4.1 quarts for the 1.8L and 3.8 quarts for the 2.4L.

    Which Corolla has the 2.4L engine?

    Check your window sticker, registration or engine cover. The manuals list the 2.4L (2AZ-FE) next to the standard 1.8L (2ZR-FE).

    How do I reset the maintenance light on a 2010–2013 Corolla?

    With trip meter A shown, turn the engine switch off, then hold the trip meter reset button while turning it on, until the trip meter shows 000000.

    Newer Corolla? See the 2014–2019 Toyota Corolla oil type and capacity.

  • 2019–2025 Toyota Corolla Hatchback Oil Type and Capacity (2.0L)

    Quick answer: the Toyota Corolla Hatchback 2.0L takes 4.9 US qt (4.6 L) of 0W-16 oil for 2019 to early 2023. Hatchbacks built from March 2023 take 4.4 US qt (4.2 L) of 0W-8.

    EngineOil capacity (with filter)Without filterOil type
    2.0L (M20A-FKS), 2019 – Feb. 2023 production4.9 US qt (4.6 L)4.5 US qt (4.3 L)0W-16
    2.0L (M20A-FKS), from Mar. 2023 production4.4 US qt (4.2 L)4.1 US qt (3.9 L)0W-8
    Source: Toyota owner’s manuals (links below).

    The 2023 hatchback changed mid-year. Manuals for cars built from March 2023 list less oil (4.4 qt) and a thinner grade (0W-8). The production month is on the certification label on the driver’s door jamb.

    Oil capacity by year

    Model yearOil capacity (with filter)Oil type
    20194.9 US qt (4.6 L)0W-16
    20204.9 US qt (4.6 L)0W-16
    20214.9 US qt (4.6 L)0W-16
    20224.9 US qt (4.6 L)0W-16
    2023 (through Feb. 2023)4.9 US qt (4.6 L)0W-16
    2023 (from Mar. 2023)4.4 US qt (4.2 L)0W-8
    20244.4 US qt (4.2 L)0W-8
    20254.4 US qt (4.2 L)0W-8

    We read the Specifications pages of all eight Corolla Hatchback owner’s manuals (2023 has two, split by production date).

    Recommended oil type

    Through Feb. 2023: SAE 0W-16. The 2019–2020 manuals add that 0W-20 may be used if 0W-16 is not available, to be replaced with 0W-16 at the next change.

    From Mar. 2023: SAE 0W-8. If it is not available, 0W-16 may be used, but it must be replaced with 0W-8 at the next oil change.

    How to reset the maintenance required light on the 2019–2025 Toyota Corolla Hatchback

    See also: Toyota maintenance required light reset for all models.

    Toyota’s manuals for the Corolla Hatchback use the settings menu of the multi-information display.

    1. With the engine running (or the power switch ON), use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
    2. Select Vehicle Settings.
    3. Select Scheduled Maintenance.
    4. Select Yes. A message confirms that the reset is complete.

    Oil change tips

    • A 5-quart jug covers one change.
    • 0W-8 is hard to find in stores: buy it before the oil change.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    What battery does the 2019–2025 Toyota Corolla Hatchback key fob take?

    CR2032 for 2019–2022 and CR2450 for 2023–2025. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

    Model yearsKey typeBattery
    2019–2022Electronic keyCR2032
    2023–2025Electronic keyCR2450
    • You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
    • Insert the new battery with the + terminal facing the way shown in the manual.
    • Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
    • A weak battery shows up as a shorter range or a key that works only up close.

    Sources and how we checked

    All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 21, 2026.

    FAQ

    How much oil does a Toyota Corolla Hatchback take?

    4.9 US quarts (4.6 L) for 2019 to Feb. 2023 production, and 4.4 US quarts (4.2 L) from Mar. 2023 production, with a filter change.

    What oil does a Corolla Hatchback use?

    0W-16 until Feb. 2023 production and 0W-8 from Mar. 2023 production.

    Can I use 0W-16 in a newer Corolla Hatchback?

    Only if 0W-8 is not available. The manuals allow 0W-16, but it must be replaced with 0W-8 at the next oil change.

    How much oil without changing the filter?

    4.5 quarts (4.3 L) before Mar. 2023 and 4.1 quarts (3.9 L) after.

    How do I reset the maintenance light on a Corolla Hatchback?

    On the multi-information display, open the settings, select Vehicle Settings, then Scheduled Maintenance, then Yes.

    Corolla sedan? See the 2020–2025 Toyota Corolla oil type and capacity.

  • 2023–2025 Toyota Prius Oil Type and Capacity (2.0L)

    Quick answer: the 2023–2025 Toyota Prius 2.0L takes 4.4 US qt (4.2 L) of oil with a filter change. Toyota recommends SAE 0W-16.

    EngineOil capacity (with filter)Without filterOil type
    2.0L 4-cylinder (M20A-FXS)4.4 US qt (4.2 L)4.1 US qt (3.9 L)0W-16
    Prius hybrid. The Prius Prime has its own manual. Source: Toyota owner’s manuals (links below).

    Same capacity, bigger engine. The new 2.0L takes the same 4.4 quarts as the old 1.8L, and also uses 0W-16.

    Oil capacity by year

    Model yearOil capacity (with filter)Without filter
    20234.4 US qt (4.2 L)4.1 US qt (3.9 L)
    20244.4 US qt (4.2 L)4.1 US qt (3.9 L)
    20254.4 US qt (4.2 L)4.1 US qt (3.9 L)

    We read the Specifications pages of the 2023, 2024 and 2025 Prius owner’s manuals.

    Recommended oil type

    Toyota Genuine Motor Oil or equivalent in SAE 0W-16. If 0W-16 is not available, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

    How to reset the maintenance required light on the 2023–2025 Toyota Prius

    See also: Toyota maintenance required light reset for all models.

    Toyota’s manuals for these years use the settings menu of the multi-information display.

    1. With the engine running (or the power switch ON), use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
    2. Select Vehicle Settings.
    3. Select Scheduled Maintenance.
    4. Select Yes. A message confirms that the reset is complete.

    Oil change tips

    • A 5-quart jug covers one change with a new filter.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    What battery does the 2023–2025 Toyota Prius key fob take?

    A CR2450 lithium coin battery. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

    Model yearsKey typeBattery
    2023–2025Electronic (smart) keyCR2450
    • You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
    • Insert the new battery with the + terminal facing the way shown in the manual.
    • Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
    • A weak battery shows up as a shorter range or a key that works only up close.

    Sources and how we checked

    All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 21, 2026.

    FAQ

    How much oil does a 2023–2025 Toyota Prius take?

    4.4 US quarts (4.2 L) with a filter change.

    What oil does a 2023–2025 Prius use?

    SAE 0W-16. If it is not available, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

    How much oil without changing the filter?

    4.1 US quarts (3.9 L).

    Is the new Prius engine different?

    Yes. The 2023 Prius uses a 2.0L (M20A-FXS) instead of the 1.8L, but the oil capacity in the manual is the same 4.4 quarts.

    How do I reset the maintenance message on a 2023–2025 Prius?

    On the multi-information display, open the settings, select Vehicle Settings, then Scheduled Maintenance, then Yes.

    Older Prius? See the 2012–2022 Toyota Prius oil type and capacity.

  • 2012–2022 Toyota Prius Oil Type and Capacity (1.8L)

    Quick answer: the 2012–2022 Toyota Prius 1.8L takes 4.4 US qt (4.2 L) of oil with a filter change. Toyota recommends SAE 0W-20 for 2012–2018 and SAE 0W-16 for 2019–2022.

    EngineOil capacity (with filter)Without filterOil type
    1.8L 4-cylinder (2ZR-FXE), 2012–20184.4 US qt (4.2 L)4.1 US qt (3.9 L)0W-20
    1.8L 4-cylinder (2ZR-FXE), 2019–20224.4 US qt (4.2 L)4.1 US qt (3.9 L)0W-16
    Prius liftback. Prius c, Prius v and Prius Prime have their own manuals. Source: Toyota owner’s manuals (links below).

    The oil grade changed in 2019. The capacity stayed at 4.4 quarts, but the 2019–2022 manuals call for 0W-16 instead of 0W-20.

    Oil capacity by year

    Model yearOil capacity (with filter)Oil type
    20124.4 US qt (4.2 L)0W-20
    20134.4 US qt (4.2 L)0W-20
    20144.4 US qt (4.2 L)0W-20
    20154.4 US qt (4.2 L)0W-20
    20164.4 US qt (4.2 L)0W-20
    20174.4 US qt (4.2 L)0W-20
    20184.4 US qt (4.2 L)0W-20
    20194.4 US qt (4.2 L)0W-16
    20204.4 US qt (4.2 L)0W-16
    20214.4 US qt (4.2 L)0W-16
    20224.4 US qt (4.2 L)0W-16

    We read the Specifications pages of the Prius owner’s manuals for every model year from 2012 to 2022.

    Recommended oil type

    2012–2018: SAE 0W-20. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

    2019–2022: SAE 0W-16. If it is not available, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

    How to reset the maintenance required light on the 2012–2022 Toyota Prius

    See also: Toyota maintenance required light reset for all models.

    This is the procedure in the 2017 Prius owner’s manual. The 2013 manual uses a trip meter method instead: with trip meter A shown, turn the POWER switch off, then turn it to ON while holding the MPH/km/h button until the trip meter shows 000000.

    1. While the hybrid system is operating, switch the multi-information display to the settings screen.
    2. Select Vehicle Settings.
    3. Select Maintenance System, then Oil Maintenance.
    4. Select Yes. A message confirms the reset.

    Oil change tips

    • A 5-quart jug covers one change with a new filter.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    What battery does the 2012–2022 Toyota Prius key fob take?

    CR1632 for 2012–2015 and CR2032 for 2016–2022. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

    Model yearsKey typeBattery
    2012–2015Electronic (smart) keyCR1632
    2016–2022Electronic (smart) keyCR2032
    • You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
    • Insert the new battery with the + terminal facing the way shown in the manual.
    • Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
    • A weak battery shows up as a shorter range or a key that works only up close.

    Sources and how we checked

    All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 21, 2026.

    FAQ

    How much oil does a Toyota Prius take?

    4.4 US quarts (4.2 L) with a filter change, for every model year from 2012 to 2022.

    What oil does a Prius use?

    SAE 0W-20 for 2012–2018 and SAE 0W-16 for 2019–2022, according to Toyota’s manuals.

    Can I use 0W-20 in a 2019–2022 Prius?

    Only if 0W-16 is not available. The manuals say 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

    How much oil without changing the filter?

    4.1 US quarts (3.9 L).

    How do I reset the oil maintenance on a newer Prius?

    In the 2017 manual: on the multi-information display, select Vehicle Settings, Maintenance System, Oil Maintenance, then Yes.

    Newer Prius? See the 2023–2025 Toyota Prius oil type and capacity.

  • 2012–2025 Toyota 4Runner Oil Type and Capacity (4.0L V6 and 2.4L Turbo)

    Quick answer: the 2012–2024 Toyota 4Runner 4.0L V6 takes 6.6 US qt (6.2 L) of oil with a filter change. The 2025 4Runner 2.4L turbo takes 5.9 US qt (5.6 L). Toyota recommends SAE 0W-20.

    EngineOil capacity (with filter)Without filterOil type
    4.0L V6 (1GR-FE), 2012–20246.6 US qt (6.2 L)6.0 US qt (5.7 L)0W-20
    2.4L turbo 4-cylinder (T24A-FTS), 20255.9 US qt (5.6 L)5.6 US qt (5.3 L)0W-20
    Source: Toyota owner’s manuals (links below).

    Buy more than 5 quarts. The V6 takes 6.6 quarts with a filter, so you need a 5-quart jug plus 2 extra quarts.

    Oil capacity by year

    Model yearEngineOil capacity (with filter)
    20124.0L V66.6 US qt (6.2 L)
    20134.0L V66.6 US qt (6.2 L)
    20144.0L V66.6 US qt (6.2 L)
    20154.0L V66.6 US qt (6.2 L)
    20164.0L V66.6 US qt (6.2 L)
    20174.0L V66.6 US qt (6.2 L)
    20184.0L V66.6 US qt (6.2 L)
    20194.0L V66.6 US qt (6.2 L)
    20204.0L V66.6 US qt (6.2 L)
    20214.0L V66.6 US qt (6.2 L)
    20224.0L V66.6 US qt (6.2 L)
    20234.0L V66.6 US qt (6.2 L)
    20244.0L V66.6 US qt (6.2 L)
    20252.4L turbo5.9 US qt (5.6 L)

    We read the Specifications pages of all 14 owner’s manuals for 2012–2025. The V6 capacity and oil grade did not change in 13 years; the listed grade moves from ILSAC GF-5 to GF-6A in later manuals.

    Recommended oil type

    Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20. For the V6, if 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

    How to reset the maintenance required light on the 2012–2025 Toyota 4Runner

    See also: Toyota maintenance required light reset for all models.

    This is the procedure in the 2020 4Runner owner’s manual (V6). The 2025 4Runner uses the settings menu: Vehicle Settings, Scheduled Maintenance, Yes.

    1. Turn the engine switch off with trip meter A displayed.
    2. While pressing the display change button, turn the engine switch to ON or IGNITION ON. Do not start the engine, or the reset mode is canceled.
    3. Keep holding the button until the trip meter shows 000000.

    Oil change tips

    • V6: have 7 quarts on hand.
    • 2.4L turbo: a 5-quart jug plus one extra quart.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    Sources and how we checked

    All capacities and oil grades on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 21, 2026.

    FAQ

    How much oil does a Toyota 4Runner take?

    The 4.0L V6 (2012–2024) takes 6.6 US quarts (6.2 L) with a filter change. The 2025 2.4L turbo takes 5.9 US quarts (5.6 L).

    What oil does a 4Runner use?

    SAE 0W-20 for both engines.

    How much oil without changing the filter?

    6.0 US quarts (5.7 L) for the V6 and 5.6 US quarts (5.3 L) for the 2.4L turbo.

    Did the 4Runner oil capacity change between 2012 and 2024?

    No. All 13 owner’s manuals list 6.6 quarts (6.2 L) with filter for the 4.0L V6.

    How do I reset the maintenance light on a 4Runner?

    On the V6 models, turn the engine off with trip meter A shown, hold the display change button while turning it to ON, and keep holding until 000000 appears.

    More Toyota trucks: Tacoma and Tundra.

  • 2012–2020 Toyota Sienna Oil Type and Capacity (V6)

    Quick answer: the 2012–2016 Toyota Sienna 3.5L V6 takes 6.4 US qt (6.1 L) of oil with a filter change. The 2017–2020 V6 takes 5.7 US qt (5.4 L), or 5.8 US qt (5.5 L) with the towing package. Toyota recommends SAE 0W-20.

    EngineOil capacity (with filter)Without filterOil type
    2.7L 4-cylinder (1AR-FE), 2012–20134.6 US qt (4.4 L)4.2 US qt (4.0 L)0W-20
    3.5L V6 (2GR-FE), 2012–20166.4 US qt (6.1 L)6.0 US qt (5.7 L)0W-20
    3.5L V6 (2GR-FKS), 2017–2020, without towing package5.7 US qt (5.4 L)5.6 US qt (5.3 L)0W-20
    3.5L V6 (2GR-FKS), 2017–2020, with towing package5.8 US qt (5.5 L)5.6 US qt (5.3 L)0W-20
    Source: Toyota owner’s manuals (links below).

    The V6 changed in 2017. The new 2GR-FKS engine takes 5.7–5.8 quarts, less than the 6.4 quarts of the 2012–2016 V6.

    Oil capacity by year

    Model year2.7L 4-cylinder3.5L V6
    20124.6 US qt (4.4 L)6.4 US qt (6.1 L)
    20134.6 US qt (4.4 L)6.4 US qt (6.1 L)
    2014—6.4 US qt (6.1 L)
    2015—6.4 US qt (6.1 L)
    2016—6.4 US qt (6.1 L)
    2017—5.7 / 5.8 US qt*
    2018—5.7 / 5.8 US qt*
    2019—5.7 / 5.8 US qt*
    2020—5.7 / 5.8 US qt*
    * 5.7 qt (5.4 L) without the towing package, 5.8 qt (5.5 L) with it. — = engine not listed in that manual.

    We read the Specifications pages of the Sienna owner’s manuals for every model year from 2012 to 2020.

    Recommended oil type

    Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

    How to reset the maintenance required light on the 2012–2020 Toyota Sienna

    See also: Toyota maintenance required light reset for all models.

    The 2013 manual uses the trip meter reset button; the 2019 manual uses the multi-information display. This is the 2019 procedure; on older vans, hold the trip meter reset button while turning the engine switch on, with trip meter A shown, until 000000 appears.

    1. While the engine is running, switch the multi-information display to the Settings screen.
    2. Select Maintenance Reset.
    3. Select Yes. “Maintenance Reset Complete” appears when it is done.

    Oil change tips

    • Have 7 quarts on hand for the V6.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    What battery does the 2012–2020 Toyota Sienna key fob take?

    A CR2032 for both the regular remote and the smart key, in every model year. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

    Model yearsKey typeBattery
    2012–2020All remote and smart keysCR2032
    • You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
    • Insert the new battery with the + terminal facing the way shown in the manual.
    • Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
    • A weak battery shows up as a shorter range or a key that works only up close.

    Sources and how we checked

    All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 21, 2026.

    FAQ

    How much oil does a Toyota Sienna V6 take?

    6.4 US quarts (6.1 L) for 2012–2016, and 5.7 quarts (5.8 with the towing package) for 2017–2020, with a filter change.

    What oil does a 2012–2020 Sienna use?

    SAE 0W-20. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

    Does the towing package change the oil capacity?

    On 2017–2020 Siennas, yes: 5.8 quarts with the towing package and 5.7 quarts without, according to the manuals.

    How much oil without changing the filter?

    6.0 quarts for the 2012–2016 V6 and 5.6 quarts for the 2017–2020 V6.

    How do I reset the maintenance light on a 2017–2020 Sienna?

    With the engine running, open the Settings screen on the multi-information display, select Maintenance Reset, then Yes.

    More Toyota models: see all Toyota oil capacities.

    Newer Sienna? See the 2021–2025 Toyota Sienna (hybrid) oil type and capacity.

  • 2012–2021 Toyota Tundra Oil Type and Capacity (V6 and V8)

    Quick answer: the 2012–2017 Toyota Tundra 4.6L and 5.7L V8 take 7.9 US qt (7.5 L) of oil with a filter change, and the 2018–2021 V8s take 8.5 US qt (8.0 L). The 4.0L V6 (2012–2014) takes 6.4 US qt (6.1 L). Toyota recommends SAE 0W-20.

    EngineOil capacity (with filter)Without filterOil type
    4.0L V6 (1GR-FE), 2012–20146.4 US qt (6.1 L)5.9 US qt (5.6 L)0W-20
    4.6L V8 (1UR-FE) and 5.7L V8 (3UR-FE, 3UR-FBE), 2012–20177.9 US qt (7.5 L)7.4–7.5 US qt (7.1 L)0W-20
    4.6L V8 and 5.7L V8, 2018–20218.5 US qt (8.0 L)7.9 US qt (7.5 L)0W-20
    3UR-FBE is the flex-fuel 5.7L. Source: Toyota owner’s manuals (links below).

    The capacity went up in 2018. The 2018–2021 manuals list 8.5 quarts with a filter for the V8s, against 7.9 quarts in 2012–2017. Use the figure for your model year.

    Oil capacity by year

    Model year4.0L V64.6L / 5.7L V8
    20126.4 US qt (6.1 L)7.9 US qt (7.5 L)
    20136.4 US qt (6.1 L)7.9 US qt (7.5 L)
    20146.4 US qt (6.1 L)7.9 US qt (7.5 L)
    2015—7.9 US qt (7.5 L)
    2016—7.9 US qt (7.5 L)
    2017—7.9 US qt (7.5 L)
    2018—8.5 US qt (8.0 L)
    2019—8.5 US qt (8.0 L)
    2020—8.5 US qt (8.0 L)
    2021—8.5 US qt (8.0 L)
    — = engine not listed in that manual. The 2020–2021 manuals list only the 5.7L V8.

    We read the Specifications pages of the Tundra owner’s manuals for every model year from 2012 to 2021 (2014 has two, split by production date).

    Recommended oil type

    Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil (ILSAC GF-5 in these manuals) in SAE 0W-20. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

    How to reset the maintenance required light on the 2012–2021 Toyota Tundra

    See also: Toyota maintenance required light reset for all models.

    The 2012–2017 manuals use the trip meter button; the 2020–2021 manuals use the multi-information display menu (Vehicle Settings, Maintenance Reset, YES). This is the trip meter method from the 2017 manual.

    1. Turn the engine switch off with trip meter A displayed.
    2. While pressing the ODO/TRIP (trip meter) button, turn the engine switch on. Do not start the engine.
    3. Keep holding the button until the display confirms the reset (000000, or a reset message on the multi-information display).

    Oil change tips

    • V8: have 9 quarts on hand (two 5-quart jugs leave some for topping up).
    • 4.0L V6: have 7 quarts on hand.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    What battery does the 2012–2021 Toyota Tundra key fob take?

    CR2032 for 2012–2017, CR2016 for 2018–2019, and for 2020–2021 CR2032 (smart key) or CR2016 (regular remote). Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

    Model yearsKey typeBattery
    2012–2017Wireless remote controlCR2032
    2018–2019Wireless remote controlCR2016
    2020–2021Smart key (keyless entry and push-button start)CR2032
    2020–2021Regular remote key (no smart key system)CR2016
    • You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
    • Insert the new battery with the + terminal facing the way shown in the manual.
    • Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
    • A weak battery shows up as a shorter range or a key that works only up close.

    Sources and how we checked

    All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 21, 2026.

    FAQ

    How much oil does a Toyota Tundra 5.7 take?

    7.9 US quarts (7.5 L) with a filter change for 2012–2017 and 8.5 US quarts (8.0 L) for 2018–2021, according to Toyota’s manuals.

    What oil does a 2012–2021 Tundra use?

    SAE 0W-20. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

    Why do 2018–2021 Tundras take more oil?

    The 2018 and later owner’s manuals list 8.5 quarts (8.0 L) with filter for the V8, up from 7.9 quarts (7.5 L). Follow the figure for your model year and check the dipstick.

    How much oil does the 4.0L V6 Tundra take?

    6.4 US quarts (6.1 L) with a filter change and 5.9 quarts without. It is listed in the 2012–2014 manuals.

    How do I reset the maintenance light on a Tundra?

    On 2012–2017 trucks, turn the engine off with trip meter A shown, hold the ODO/TRIP button while turning it on, and keep holding until the reset is confirmed. On 2020–2021 trucks, use Vehicle Settings, Maintenance Reset, YES on the multi-information display.

    Newer Tundra? See the 2022–2025 Toyota Tundra oil type and capacity.

  • 2022–2025 Toyota Tundra Oil Type and Capacity (3.4L Twin-Turbo V6)

    Quick answer: the 2022–2025 Toyota Tundra 3.4L twin-turbo V6 takes 7.7 US qt (7.3 L) of oil with a filter change. Toyota recommends SAE 0W-20.

    EngineOil capacity (with filter)Without filterOil type
    3.4L twin-turbo V6 (V35A-FTS)7.7 US qt (7.3 L)7.4 US qt (7.0 L)0W-20
    Source: Toyota owner’s manuals (links below).

    Less oil than the old V8. The twin-turbo V6 takes 7.7 quarts with a filter, against 8.5 quarts in the 2018–2021 Tundra V8.

    Oil capacity by year

    Model yearOil capacity (with filter)Without filter
    20227.7 US qt (7.3 L)7.4 US qt (7.0 L)
    20237.7 US qt (7.3 L)7.4 US qt (7.0 L)
    20247.7 US qt (7.3 L)7.4 US qt (7.0 L)
    20257.7 US qt (7.3 L)7.4 US qt (7.0 L)

    We read the Specifications pages of the 2022, 2023, 2024 and 2025 Tundra owner’s manuals.

    Recommended oil type

    Toyota Genuine Motor Oil or an equivalent ILSAC GF-6A multigrade oil in SAE 0W-20.

    How to reset the maintenance required light on the 2022–2025 Toyota Tundra

    See also: Toyota maintenance required light reset for all models.

    Toyota’s manuals for these years use the settings menu of the multi-information display.

    1. With the engine running (or the power switch ON), use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
    2. Select Vehicle Settings.
    3. Select Scheduled Maintenance.
    4. Select Yes. A message confirms that the reset is complete.

    Oil change tips

    • Have 8 quarts on hand: two 5-quart jugs cover it with oil left for topping up.
    • Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

    What battery does the 2022–2025 Toyota Tundra key fob take?

    A CR2450 lithium coin battery. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

    Model yearsKey typeBattery
    2022–2025Electronic (smart) keyCR2450
    • You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
    • Insert the new battery with the + terminal facing the way shown in the manual.
    • Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
    • A weak battery shows up as a shorter range or a key that works only up close.

    Sources and how we checked

    All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

    Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 21, 2026.

    FAQ

    How much oil does a 2022–2025 Toyota Tundra take?

    7.7 US quarts (7.3 L) with a filter change.

    What oil does a 2022–2025 Tundra use?

    SAE 0W-20, ILSAC GF-6A multigrade engine oil.

    How much oil without changing the filter?

    7.4 US quarts (7.0 L).

    Does the new Tundra take more oil than the V8?

    No. The 3.4L twin-turbo V6 takes 7.7 quarts, less than the 8.5 quarts listed for the 2018–2021 V8.

    How do I reset the maintenance light on a 2022–2025 Tundra?

    On the multi-information display, open the settings, select Vehicle Settings, then Scheduled Maintenance, then Yes.

    Older Tundra? See the 2012–2021 Toyota Tundra oil type and capacity.