Category: Toyota

Quick answer: the 2020–2022 Toyota Highlander V6 takes 5.8 US qt (5.5 L) of oil with a filter change, and the 2023–2025 Highlander 2.4L turbo takes 5.6 US qt (5.3 L). Toyota recommends SAE 0W-20 for both.

Engine	Oil capacity (with filter)	Without filter	Oil type
3.5L V6 (2GR-FKS), 2020–2022	5.8 US qt (5.5 L)	5.6 US qt (5.3 L)	0W-20
2.4L turbo 4-cylinder (T24A-FTS), 2023–2025	5.6 US qt (5.3 L)	5.3 US qt (5.0 L)	0W-20

Oil capacity by year

Model year	Engine	Oil capacity (with filter)
2020	3.5L V6	5.8 US qt (5.5 L)
2021	3.5L V6	5.8 US qt (5.5 L)
2022	3.5L V6	5.8 US qt (5.5 L)
2023	2.4L turbo	5.6 US qt (5.3 L)
2024	2.4L turbo	5.6 US qt (5.3 L)
2025	2.4L turbo	5.6 US qt (5.3 L)

We read the Specifications pages of the gasoline Highlander owner’s manuals for every model year from 2020 to 2025 (2021 has two, split by production date).

Recommended oil type

Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20. The manuals allow 5W-20 if 0W-20 is not available, but it must be replaced with 0W-20 at the next oil change. The listed grade moves from ILSAC GF-5 to GF-6A with the 2.4L turbo.

How to reset the maintenance required light on the 2020–2025 Toyota Highlander

See also: Toyota maintenance required light reset for all models.

Toyota’s manuals for these years use the settings menu of the multi-information display.

1. With the engine running (or the power switch ON), use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
2. Select Vehicle Settings.
3. Select Scheduled Maintenance.
4. Select Yes. A message confirms that the reset is complete.

Oil change tips

• Have 6 quarts on hand: a 5-quart jug plus one extra quart.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

What battery does the 2020–2025 Toyota Highlander key fob take?

CR2032 for 2020–2024 and CR2450 for 2025. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

Model years	Key type	Battery
2020–2024	Electronic key	CR2032
2025	Electronic key	CR2450

• You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
• Insert the new battery with the + terminal facing the way shown in the manual.
• Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
• A weak battery shows up as a shorter range or a key that works only up close.

Sources and how we checked

All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2020 Highlander owner’s manual
• 2021 Highlander owner’s manual (through Feb. 2021 production)
• 2021 Highlander owner’s manual (from Mar. 2021 production)
• 2022 Highlander owner’s manual
• 2023 Highlander owner’s manual
• 2024 Highlander owner’s manual
• 2025 Highlander owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2020–2025 Toyota Highlander take?

5.8 US quarts (5.5 L) for the 2020–2022 V6 and 5.6 US quarts (5.3 L) for the 2023–2025 2.4L turbo, with a filter change.

What oil does a 2020–2025 Highlander use?

SAE 0W-20 for both engines.

How much oil without changing the filter?

5.6 US quarts (5.3 L) for the V6 and 5.3 US quarts (5.0 L) for the 2.4L turbo.

Is a 5-quart jug enough for a Highlander oil change?

No. Both engines take more than 5 quarts with a new filter, so buy one extra quart.

How do I reset the maintenance light on a 2020–2025 Highlander?

On the multi-information display, open the settings, select Vehicle Settings, then Scheduled Maintenance, then Yes.

Older Highlander? See the 2014–2019 Toyota Highlander oil type and capacity.

Quick answer: the 2024–2025 Toyota Tacoma 2.4L turbo takes 5.9 US qt (5.6 L) of oil with a filter change. Toyota recommends SAE 0W-20.

Engine	Oil capacity (with filter)	Without filter	Oil type
2.4L turbo 4-cylinder (T24A-FTS)	5.9 US qt (5.6 L)	5.6 US qt (5.3 L)	0W-20

Oil capacity by year

Model year	Oil capacity (with filter)	Without filter
2024	5.9 US qt (5.6 L)	5.6 US qt (5.3 L)
2025	5.9 US qt (5.6 L)	5.6 US qt (5.3 L)

We read the Specifications pages of the 2024 and 2025 owner’s manuals.

Recommended oil type

Toyota Genuine Motor Oil or an equivalent ILSAC GF-6A multigrade oil in SAE 0W-20.

How to reset the maintenance required light on the 2024–2025 Toyota Tacoma

See also: Toyota maintenance required light reset for all models.

This is the procedure in the 2024 Tacoma owner’s manual.

1. With the engine running (or the power switch ON), use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
2. Select Vehicle Settings.
3. Select Scheduled Maintenance.
4. Select Yes. A message confirms that the reset is complete.

Oil change tips

• Have 6 quarts on hand: a 5-quart jug plus one extra quart.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

Sources and how we checked

All capacities and oil grades on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2024 Tacoma owner’s manual
• 2025 Tacoma owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2024–2025 Toyota Tacoma take?

5.9 US quarts (5.6 L) with a filter change.

What oil does a 2024–2025 Tacoma use?

SAE 0W-20, ILSAC GF-6A multigrade engine oil.

How much oil without changing the filter?

5.6 US quarts (5.3 L).

Is a 5-quart jug enough for the new Tacoma?

No. With a filter change it takes 5.9 quarts, so you need one extra quart.

How do I reset the maintenance light on a 2024–2025 Tacoma?

On the multi-information display, open the settings, select Vehicle Settings, then Scheduled Maintenance, then Yes.

Older Tacoma? See the 2016–2023 Toyota Tacoma oil type and capacity.

Quick answer: the 2014–2019 Toyota Highlander 2.7L takes 4.6 US qt (4.4 L) of oil with a filter change. The 3.5L V6 takes 6.4 US qt (6.1 L) in 2014–2016 and 5.8 US qt (5.5 L) in 2017–2019. Toyota recommends SAE 0W-20.

Engine	Oil capacity (with filter)	Without filter	Oil type
2.7L 4-cylinder (1AR-FE)	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)	0W-20
3.5L V6 (2GR-FE), 2014–2016	6.4 US qt (6.1 L)	6.0 US qt (5.7 L)	0W-20
3.5L V6 (2GR-FKS), 2017–2019	5.8 US qt (5.5 L)	5.6 US qt (5.3 L)	0W-20

Oil capacity by year

Model year	2.7L 4-cylinder	3.5L V6
2014	4.6 US qt (4.4 L)	6.4 US qt (6.1 L)
2015	4.6 US qt (4.4 L)	6.4 US qt (6.1 L)
2016	4.6 US qt (4.4 L)	6.4 US qt (6.1 L)
2017	4.6 US qt (4.4 L)	5.8 US qt (5.5 L)
2018	4.6 US qt (4.4 L)	5.8 US qt (5.5 L)
2019	4.6 US qt (4.4 L)	5.8 US qt (5.5 L)

We read the Specifications pages of all six owner’s manuals.

Recommended oil type

Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20 for both engines. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

How to reset the maintenance required light on the 2014–2019 Toyota Highlander

See also: Toyota maintenance required light reset for all models.

This is the trip meter procedure in the 2014 Highlander owner’s manual (U.S. models). Cars with a multi-information display can also reset it from the settings screen; see your manual.

1. Turn the engine switch off (or to LOCK) with trip meter A displayed.
2. While pressing the trip meter reset button, turn the engine switch to ON or IGNITION ON. Do not start the engine, or the reset mode is canceled.
3. Keep holding the button until the trip meter shows 000000.

Oil change tips

• 2.7L: a 5-quart jug covers one change.
• V6: have 7 quarts on hand.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

Sources and how we checked

All capacities and oil grades on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2014 Highlander owner’s manual
• 2015 Highlander owner’s manual
• 2016 Highlander owner’s manual
• 2017 Highlander owner’s manual
• 2018 Highlander owner’s manual
• 2019 Highlander owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2014–2019 Toyota Highlander take?

The 2.7L takes 4.6 US quarts (4.4 L). The V6 takes 6.4 quarts (6.1 L) in 2014–2016 and 5.8 quarts (5.5 L) in 2017–2019. All with a filter change.

What oil does a 2014–2019 Highlander use?

SAE 0W-20. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

Why does the 2017 Highlander V6 take less oil?

The 2017 update replaced the 2GR-FE V6 with the 2GR-FKS, and Toyota’s manuals list 5.8 quarts for it instead of 6.4.

How much oil without changing the filter?

4.2 qt for the 2.7L, 6.0 qt for the 2014–2016 V6 and 5.6 qt for the 2017–2019 V6.

How do I reset the maintenance light on a 2014–2019 Highlander?

With trip meter A shown, turn the engine off, then hold the trip meter reset button while turning it to ON and keep holding until it shows 000000.

Newer Highlander? See the 2020–2025 Toyota Highlander oil type and capacity.

Quick answer: the 2019–2023 Toyota RAV4 2.5L takes 4.8 US qt (4.5 L) of oil with a filter change, and the 2024–2025 RAV4 takes 4.5 US qt (4.3 L). Toyota recommends SAE 0W-16.

Engine	Oil capacity (with filter)	Without filter	Oil type
2.5L 4-cylinder (A25A-FKS), 2019–2023	4.8 US qt (4.5 L)	4.4 US qt (4.2 L)	0W-16
2.5L 4-cylinder (A25A-FKS), 2024–2025	4.5 US qt (4.3 L)	4.2 US qt (4.0 L)	0W-16

Oil capacity by year

Model year	Oil capacity (with filter)	Without filter
2019	4.8 US qt (4.5 L)	4.4 US qt (4.2 L)
2020	4.8 US qt (4.5 L)	4.4 US qt (4.2 L)
2021	4.8 US qt (4.5 L)	4.4 US qt (4.2 L)
2022	4.8 US qt (4.5 L)	4.4 US qt (4.2 L)
2023	4.8 US qt (4.5 L)	4.4 US qt (4.2 L)
2024	4.5 US qt (4.3 L)	4.2 US qt (4.0 L)
2025	4.5 US qt (4.3 L)	4.2 US qt (4.0 L)

We read the Specifications pages of the gasoline RAV4 owner’s manuals for every model year from 2019 to 2025.

Recommended oil type

Toyota Genuine Motor Oil or equivalent in SAE 0W-16. If 0W-16 is not available, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

How to reset the maintenance required light on the 2019–2025 Toyota RAV4

See also: Toyota maintenance required light reset for all models.

Toyota’s manuals let you reset the scheduled maintenance information from the settings menu of the multi-information display.

1. With the engine running (or the power switch ON), use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
2. Select Vehicle Settings.
3. Select Scheduled Maintenance.
4. Select Yes. A message confirms that the reset is complete.

Oil change tips

• A 5-quart jug covers one change with a new filter.
• 0W-16 is less common than 0W-20 on store shelves: buy it before the oil change.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

Sources and how we checked

All capacities and oil grades on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2019 RAV4 owner’s manual
• 2020 RAV4 owner’s manual
• 2021 RAV4 owner’s manual
• 2022 RAV4 owner’s manual
• 2023 RAV4 owner’s manual
• 2024 RAV4 owner’s manual (Japan production, through June 2024)
• 2024 RAV4 owner’s manual (Canada production, through June 2024)
• 2025 RAV4 owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2019–2025 Toyota RAV4 take?

4.8 US quarts (4.5 L) with a filter change for 2019–2023, and 4.5 US quarts (4.3 L) for 2024–2025.

What oil does a 2019–2025 RAV4 use?

SAE 0W-16. If it is not available, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

How much oil without changing the filter?

4.4 US quarts (4.2 L) for 2019–2023 and 4.2 US quarts (4.0 L) for 2024–2025.

Why does the 2024 RAV4 take less oil?

The 2024 owner’s manuals list 4.5 qt (4.3 L) with filter for the A25A-FKS engine, down from 4.8 qt (4.5 L). Use the figure for your model year and check the dipstick.

How do I reset the maintenance light on a 2019–2025 RAV4?

On the multi-information display, open the settings, select Vehicle Settings, then Scheduled Maintenance, then Yes.

Older RAV4? See the 2013–2018 Toyota RAV4 oil type and capacity.

Quick answer: the 2016–2023 Toyota Tacoma takes 6.2 US qt (5.9 L) of oil with a filter change with the 2.7L 4-cylinder. The 3.5L V6 takes 6.1 US qt (5.8 L) without the towing package or 6.2 US qt (5.9 L) with it (2016–2020), and 6.2 qt in every 2021–2023 V6. Toyota recommends SAE 0W-20.

Engine	Oil capacity (with filter)	Without filter	Oil type
2.7L 4-cylinder (2TR-FE)	6.2 US qt (5.9 L)	5.8 US qt (5.5 L)	0W-20
3.5L V6 (2GR-FKS), 2016–2020, without towing package	6.1 US qt (5.8 L)	5.9 US qt (5.6 L)	0W-20
3.5L V6 (2GR-FKS), 2016–2020, with towing package	6.2 US qt (5.9 L)	5.9 US qt (5.6 L)	0W-20
3.5L V6 (2GR-FKS), 2021–2023	6.2 US qt (5.9 L)	5.9 US qt (5.6 L)	0W-20

Oil capacity by year

Model year	2.7L 4-cylinder	3.5L V6
2016	6.2 US qt (5.9 L)	6.1 / 6.2 US qt*
2017	6.2 US qt (5.9 L)	6.1 / 6.2 US qt*
2018	6.2 US qt (5.9 L)	6.1 / 6.2 US qt*
2019	6.2 US qt (5.9 L)	6.1 / 6.2 US qt*
2020	6.2 US qt (5.9 L)	6.1 / 6.2 US qt*
2021	6.2 US qt (5.9 L)	6.2 US qt (5.9 L)
2022	6.2 US qt (5.9 L)	6.2 US qt (5.9 L)
2023	6.2 US qt (5.9 L)	6.2 US qt (5.9 L)

We read the Specifications pages of all eight owner’s manuals. From the 2021 manual on, Toyota lists a single 6.2-quart figure for both engines.

Recommended oil type

Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20 for both engines. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change. The oil grade listed moves from ILSAC GF-5 to GF-6A in the 2023 manual.

How to reset the maintenance required light on the 2016–2023 Toyota Tacoma

See also: Toyota maintenance required light reset for all models.

This is the procedure in the 2017 Tacoma owner’s manual (U.S. models).

1. Turn the engine switch off.
2. While pressing the ODO/TRIP button, turn the engine switch to ON (or IGNITION ON). Do not start the engine, or the reset mode is canceled.
3. Keep holding the button until the odometer shows 000000.

Oil change tips

• Have 7 quarts on hand for either engine.
• Add about 5.5 quarts, check the dipstick, then top up.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

Sources and how we checked

All capacities and oil grades on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2016 Tacoma owner’s manual
• 2017 Tacoma owner’s manual
• 2018 Tacoma owner’s manual
• 2019 Tacoma owner’s manual
• 2020 Tacoma owner’s manual
• 2021 Tacoma owner’s manual
• 2022 Tacoma owner’s manual
• 2023 Tacoma owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2016–2023 Toyota Tacoma take?

The 2.7L takes 6.2 US quarts (5.9 L) with a filter change. The 3.5L V6 takes 6.1 quarts without the towing package or 6.2 quarts with it (2016–2020), and 6.2 quarts in 2021–2023.

What oil does a 2016–2023 Tacoma use?

SAE 0W-20 for both engines. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

How much oil without changing the filter?

5.8 US quarts (5.5 L) for the 2.7L and 5.9 US quarts (5.6 L) for the V6.

Does the towing package change the oil capacity?

In the 2016–2020 manuals, yes: the V6 with the towing package takes 6.2 quarts and without it 6.1 quarts. The 2021–2023 manuals list 6.2 quarts for all V6 trucks.

How do I reset the maintenance light on a 2016–2023 Tacoma?

Turn the engine switch off, then hold the ODO/TRIP button while turning it to ON, without starting the engine, and keep holding until the odometer shows 000000.

Newer Tacoma? See the 2024–2025 Toyota Tacoma oil type and capacity.

Quick answer: the 2013–2018 Toyota RAV4 2.5L takes 4.6 US qt (4.4 L) of oil with a filter change. Toyota recommends SAE 0W-20.

Engine	Oil capacity (with filter)	Without filter	Oil type
2.5L 4-cylinder (2AR-FE)	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)	0W-20

Oil capacity by year

Model year	Oil capacity (with filter)	Without filter
2013	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)
2014	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)
2015	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)
2016	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)
2017	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)
2018	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)

We read the Specifications pages of all eight owner’s manuals Toyota publishes for 2013–2018 (2014 and 2015 have two each, split by production date). They all list the same engine, capacity and oil grade.

Recommended oil type

Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil (ILSAC GF-5 in these manuals) in SAE 0W-20. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

How to reset the maintenance required light on the 2013–2018 Toyota RAV4

See also: Toyota maintenance required light reset for all models.

This is the procedure in the 2013 RAV4 owner’s manual (U.S. models). Later cars with a color multi-information display can also reset it from the settings screen; see your manual.

1. Display trip meter A, then turn the engine switch off (or to LOCK).
2. While pressing the DISP / ODO-TRIP button (the trip meter button), turn the engine switch to ON or IGNITION ON. Do not start the engine, or the reset mode is canceled.
3. Keep holding the button until the trip meter shows 000000.

Oil change tips

• Add about 4 quarts, check the dipstick, then top up.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

What battery does the 2013–2018 Toyota RAV4 key fob take?

CR2032 for the smart key (push-button start) and CR2016 for the regular remote key. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

Model years	Key type	Battery
2013–2018	Smart key (keyless entry and push-button start)	CR2032
2013–2018	Regular remote key (no smart key system)	CR2016

• You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
• Insert the new battery with the + terminal facing the way shown in the manual.
• Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
• A weak battery shows up as a shorter range or a key that works only up close.

Sources and how we checked

All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2013 RAV4 owner’s manual
• 2014 RAV4 owner’s manual (through Nov. 2013 production)
• 2014 RAV4 owner’s manual (from Dec. 2013 production)
• 2015 RAV4 owner’s manual (through Sep. 2014 production)
• 2015 RAV4 owner’s manual (from Oct. 2014 production)
• 2016 RAV4 owner’s manual
• 2017 RAV4 owner’s manual
• 2018 RAV4 owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2018 Toyota RAV4 take?

A 2018 Toyota RAV4 with the 2.5L gas engine takes 4.6 US qt (4.4 L) of SAE 0W-20 with a filter change, or 4.2 US qt (4.0 L) without changing the filter. The RAV4 Hybrid has its own figures in its owner’s manual.

What oil does a 2014 Toyota RAV4 take?

SAE 0W-20. Every 2013–2018 RAV4 2.5L, including the 2014, takes 4.6 US qt (4.4 L) with a new filter.

How much oil does a 2013–2018 Toyota RAV4 take?

4.6 US quarts (4.4 L) with a filter change, for every model year from 2013 to 2018.

What oil does a 2013–2018 RAV4 use?

SAE 0W-20. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

How much oil without changing the filter?

4.2 US quarts (4.0 L).

Does the 2019 RAV4 take the same oil?

No. The 2019 and newer RAV4 has the A25A-FKS engine, which takes 4.8 quarts (4.5 quarts from 2024) of SAE 0W-16.

How do I reset the maintenance light on a 2013–2018 RAV4?

With trip meter A shown, turn the engine switch off, then hold the DISP button while turning it to ON, and keep holding until the trip meter shows 000000.

Newer RAV4? See the 2019–2025 Toyota RAV4 oil type and capacity.

Quick answer: the 2014–2019 Toyota Corolla 1.8L takes 4.4 US qt (4.2 L) of oil with a filter change. Toyota recommends SAE 0W-20.

Engine	Oil capacity (with filter)	Without filter	Oil type
1.8L 4-cylinder (2ZR-FE / 2ZR-FAE)	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)	0W-20

Oil capacity by year

Model year	Oil capacity (with filter)	Without filter
2014	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)
2015	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)
2016	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)
2017	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)
2018	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)
2019	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)

We read the Specifications pages of all six owner’s manuals. Both versions of the 1.8L engine (2ZR-FE and the Valvematic 2ZR-FAE used in the LE Eco) share the same capacity.

Recommended oil type

Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

How to reset the maintenance required light on the 2014–2019 Toyota Corolla

See also: Toyota maintenance required light reset for all models.

This is the procedure in the 2014 Corolla owner’s manual (U.S. models). Cars with a color multi-information display (2019) can also reset it from the settings menu; see your manual.

1. Turn the engine switch off with trip meter A displayed.
2. While pressing the DISP switch or the display change button, turn the engine switch to ON (IGNITION ON). Do not start the engine, or the reset mode is canceled.
3. Keep holding the button until the trip meter shows 000000.

Oil change tips

• Add about 4 quarts, check the dipstick, then top up.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

Sources and how we checked

All capacities and oil grades on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2014 Corolla owner’s manual
• 2015 Corolla owner’s manual
• 2016 Corolla owner’s manual
• 2017 Corolla owner’s manual
• 2018 Corolla owner’s manual
• 2019 Corolla owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2014–2019 Toyota Corolla take?

4.4 US quarts (4.2 L) with a filter change, for every model year from 2014 to 2019.

What oil does a 2014–2019 Corolla use?

SAE 0W-20. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

How much oil without changing the filter?

4.1 US quarts (3.9 L).

Does the Corolla LE Eco take a different amount?

No. The manuals list the 2ZR-FE and the 2ZR-FAE (Valvematic) 1.8L engines together, with the same 4.4-quart capacity.

How do I reset the maintenance light on a 2014–2019 Corolla?

With trip meter A shown, turn the car off, then hold the DISP or display change button while turning the switch to ON, and keep holding until the trip meter shows 000000.

Newer Corolla? See the 2020–2025 Toyota Corolla oil type and capacity.

Older Corolla? See the 2010–2013 Toyota Corolla oil type and capacity.

Quick answer: the 2020–2025 Toyota Corolla takes 4.4 US qt (4.2 L) with the 1.8L engine and 4.9 US qt (4.6 L) with the 2.0L engine (2020–2023). The 2024–2025 2.0L takes 4.4 US qt (4.2 L). The newest 2.0L models are specified for 0W-8 oil.

Engine and years	Oil capacity (with filter)	Without filter	Oil type
1.8L (2ZR-FAE), 2020–2022	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)	0W-20
2.0L (M20A-FKS), 2020 to 2023 built through Mar. 2023	4.9 US qt (4.6 L)	4.5 US qt (4.3 L)	0W-16
2.0L (M20A-FKS), 2023 built from Apr. 2023	4.9 US qt (4.6 L)	4.5 US qt (4.3 L)	0W-8
2.0L (M20A-FKS), 2024–2025	4.4 US qt (4.2 L)	4.1 US qt (3.9 L)	0W-8

Oil capacity by year

Model year	1.8L	2.0L	2.0L oil grade
2020	4.4 US qt (4.2 L)	4.9 US qt (4.6 L)	0W-16
2021	4.4 US qt (4.2 L)	4.9 US qt (4.6 L)	0W-16
2022	4.4 US qt (4.2 L)	4.9 US qt (4.6 L)	0W-16
2023 (through Mar. 2023)	—	4.9 US qt (4.6 L)	0W-16
2023 (from Apr. 2023)	—	4.9 US qt (4.6 L)	0W-8
2024	—	4.4 US qt (4.2 L)	0W-8
2025	—	4.4 US qt (4.2 L)	0W-8

Recommended oil type

1.8L (2ZR-FAE): SAE 0W-20. If unavailable, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

2.0L through March 2023 production: SAE 0W-16 (ILSAC GF-5 or GF-6B in the manuals). If unavailable, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

2.0L from April 2023 production: SAE 0W-8, grade JASO GLV-1. If unavailable, 0W-16 may be used, but it must be replaced with 0W-8 at the next oil change.

How to reset the maintenance required light on the 2020–2025 Toyota Corolla

See also: Toyota maintenance required light reset for all models.

This is the procedure in the 2021 and 2024 Corolla owner’s manuals.

1. With the engine running (or the power switch ON), use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
2. Select Vehicle Settings.
3. Select Scheduled Maintenance.
4. Select Yes. A message confirms that the reset is complete.

Oil change tips

• A 5-quart jug covers one change on any of these engines.
• 0W-8 is not sold everywhere: buy it before the oil change, or use 0W-16 and switch back to 0W-8 next time, as the manual allows.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

What battery does the 2020–2025 Toyota Corolla key fob take?

CR2032 for 2020–2022. From 2023 the smart key takes a larger CR2450, while the regular remote key still takes a CR2032. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

Model years	Key type	Battery
2020–2022	All remote and smart keys	CR2032
2023–2025	Smart key (keyless entry and push-button start)	CR2450
2023–2025	Regular remote key (no smart key system)	CR2032

• You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
• Insert the new battery with the + terminal facing the way shown in the manual.
• Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
• A weak battery shows up as a shorter range or a key that works only up close.

Sources and how we checked

All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2020 Corolla owner’s manual
• 2021 Corolla owner’s manual
• 2022 Corolla owner’s manual
• 2023 Corolla owner’s manual (through Mar. 2023 production)
• 2023 Corolla owner’s manual (Apr.–May 2023 production)
• 2023 Corolla owner’s manual (from June 2023 production)
• 2024 Corolla owner’s manual
• 2025 Corolla owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2020–2025 Toyota Corolla take?

The 1.8L (2020–2022) takes 4.4 US quarts (4.2 L). The 2.0L takes 4.9 US quarts (4.6 L) in 2020–2023 and 4.4 US quarts (4.2 L) in 2024–2025. All with a filter change.

What oil does a 2020–2025 Corolla use?

The 1.8L uses 0W-20. The 2.0L uses 0W-16 in the manuals through March 2023 production, and 0W-8 from April 2023 production on.

What is 0W-8 oil and can I use 0W-16 instead?

0W-8 is a very low-viscosity oil (JASO GLV-1 grade) that Toyota specifies for the newer 2.0L Corolla. If 0W-8 is not available, the manuals allow 0W-16, but it must be replaced with 0W-8 at the next oil change.

Which engine does my Corolla have?

Check the engine size on your window sticker, registration or engine cover. The 2020–2022 manuals cover both the 1.8L and the 2.0L; the 2023–2025 manuals list only the 2.0L.

How do I reset the maintenance light on a 2020–2025 Corolla?

Use the meter control switches to open the settings screen, then select Vehicle Settings, Scheduled Maintenance and Yes.

Older Corolla? See the 2014–2019 Toyota Corolla oil type and capacity.

Quick answer: the 2012–2017 Toyota Camry 2.5L 4-cylinder takes 4.6 US qt (4.4 L) of oil with a filter change, and the 3.5L V6 takes 6.4 US qt (6.1 L). Toyota recommends SAE 0W-20.

Engine	Oil capacity (with filter)	Without filter	Oil type
2.5L 4-cylinder (2AR-FE)	4.6 US qt (4.4 L)	4.2 US qt (4.0 L)	0W-20
3.5L V6 (2GR-FE)	6.4 US qt (6.1 L)	6.0 US qt (5.7 L)	0W-20

Oil capacity by year

Model year	2.5L 4-cylinder	3.5L V6
2012	4.6–4.7 US qt (4.4 L)*	6.4 US qt (6.1 L)
2013	4.6 US qt (4.4 L)	6.4 US qt (6.1 L)
2014	4.6 US qt (4.4 L)	6.4 US qt (6.1 L)
2015	4.6 US qt (4.4 L)	6.4 US qt (6.1 L)
2016	4.6 US qt (4.4 L)	6.4 US qt (6.1 L)
2017	4.6 US qt (4.4 L)	6.4 US qt (6.1 L)

We read the Specifications pages of all ten owner’s manuals Toyota publishes for these model years (some years have two manuals, split by production date). The liters, the engines and the oil grade are the same in every one.

Recommended oil type

Toyota’s manuals call for Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20, which they describe as the best choice for fuel economy and cold starts. If 0W-20 is not available you may use 5W-20, but it must be replaced with 0W-20 at the next oil change.

How to reset the maintenance required light on the 2012–2017 Toyota Camry

See also: Toyota maintenance required light reset for all models.

Toyota calls this resetting the maintenance data (U.S. models). Two procedures appear in the manuals; use the one that matches your instrument cluster.

Trip meter method (2012 owner’s manual)

1. Turn the vehicle off with trip meter A displayed.
2. While pressing the display change button, turn the engine switch to ON (or the ENGINE START STOP switch to IGNITION ON). Do not start the engine.
3. Keep holding the button until the trip meter shows 000000.

Models with a multi-information display (2017 owner’s manual)

1. With the engine running, switch the multi-information display to the Settings screen.
2. Select Maintenance Reset.
3. Select Yes. “Maintenance Reset Complete” appears when it is done.

Oil change tips

• 2.5L: one 5-quart jug covers a change with a new filter.
• 3.5L V6: have about 7 quarts on hand.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

What battery does the 2012–2017 Toyota Camry key fob take?

CR2032 for the smart key (push-button start) and CR2016 for the regular remote key. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.

Model years	Key type	Battery
2012–2017	Smart key (keyless entry and push-button start)	CR2032
2012–2017	Regular remote key (no smart key system)	CR2016

• You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
• Insert the new battery with the + terminal facing the way shown in the manual.
• Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
• A weak battery shows up as a shorter range or a key that works only up close.

Sources and how we checked

All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2012 Camry owner’s manual (through Dec. 2011 production)
• 2012 Camry owner’s manual (from June 2012 production)
• 2013 Camry owner’s manual
• 2014 Camry owner’s manual (through Nov. 2013 production)
• 2015 Camry owner’s manual
• 2016 Camry owner’s manual (through Mar. 2016 production)
• 2017 Camry owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2012 Toyota Camry take?

A 2012 Toyota Camry 2.5L takes 4.6 US qt (4.4 L) of SAE 0W-20 with a filter change (the manuals for early-2012 cars print 4.7 qt). The 3.5L V6 takes 6.4 US qt (6.1 L).

How many quarts of oil does a 2017 Toyota Camry take?

4.6 US qt (4.4 L) for the 2.5L 4-cylinder and 6.4 US qt (6.1 L) for the 3.5L V6, both with a new filter and SAE 0W-20.

How much oil does a 2012–2017 Toyota Camry take?

The 2.5L 4-cylinder takes 4.6 US quarts (4.4 L) with a filter change and the 3.5L V6 takes 6.4 US quarts (6.1 L).

What oil does a 2012–2017 Camry use?

Toyota recommends SAE 0W-20 for both engines. If 0W-20 is not available, the manuals allow 5W-20, but it must be replaced with 0W-20 at the next oil change.

Why do some sources say 4.7 quarts for the 2012 Camry?

The early 2012 Camry manuals print 4.7 qt for the 2.5L, while later manuals print 4.6 qt. Both list the same 4.4 liters; it is a rounding difference.

How much oil without changing the filter?

4.2 US quarts (4.0 L) for the 2.5L and 6.0 US quarts (5.7 L) for the V6.

How do I reset the maintenance light on a 2012–2017 Camry?

With trip meter A shown, turn the vehicle off, then hold the display button while turning it to ON and keep holding until the trip meter shows 000000. Models with a multi-information display can also use Settings, Maintenance Reset, Yes.

Newer Camry? See the 2018–2024 Toyota Camry oil type and capacity.

Quick answer: the 2018–2023 Toyota Camry 2.5L takes 4.8 US qt (4.5 L) of oil with a filter change, the 2024 Camry 2.5L takes 4.5 US qt (4.3 L), and the 3.5L V6 takes 5.7 US qt (5.4 L). Toyota specifies 0W-16 for the 2.5L and 0W-20 for the V6.

Engine	Oil capacity (with filter)	Without filter	Oil type
2.5L 4-cylinder (A25A-FKS), 2018–2023	4.8 US qt (4.5 L)	4.4 US qt (4.2 L)	0W-16
2.5L 4-cylinder (A25A-FKS), 2024	4.5 US qt (4.3 L)	4.2 US qt (4.0 L)	0W-16
3.5L V6 (2GR-FKS)	5.7 US qt (5.4 L)	5.6 US qt (5.3 L)	0W-20

Oil capacity by year

Model year	2.5L 4-cylinder	3.5L V6
2018	4.8 US qt (4.5 L)	5.7 US qt (5.4 L)
2019	4.8 US qt (4.5 L)	5.7 US qt (5.4 L)
2020	4.8 US qt (4.5 L)	5.7 US qt (5.4 L)
2021	4.8 US qt (4.5 L)	5.7 US qt (5.4 L)
2022	4.8 US qt (4.5 L)	5.7 US qt (5.4 L)
2023	4.8 US qt (4.5 L)	5.7 US qt (5.4 L)
2024	4.5 US qt (4.3 L)	5.7 US qt (5.4 L)

We read the Specifications pages of all eight owner’s manuals Toyota publishes for 2018–2024 (2018 has two, split by production date).

Recommended oil type

2.5L 4-cylinder (A25A-FKS): Toyota Genuine Motor Oil or equivalent in SAE 0W-16. If 0W-16 is not available, 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

3.5L V6 (2GR-FKS): SAE 0W-20. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.

The oil grade listed in the manuals moves from API SN/RC and ILSAC GF-5 (2018–2021) to ILSAC GF-6A/GF-6B (2022–2024). Any current oil with the ILSAC certification mark and the right viscosity meets the requirement.

How to reset the maintenance required light on the 2018–2024 Toyota Camry

See also: Toyota maintenance required light reset for all models.

This is the procedure in the 2018 Camry owner’s manual for cars with the maintenance message (on some models).

1. With the engine running (or the power switch ON), use the meter control switches on the steering wheel to open the settings screen on the multi-information display.
2. Select Vehicle Settings.
3. Select Scheduled Maintenance.
4. Select Yes. A message confirms that the reset is complete.

Oil change tips

• 2.5L: one 5-quart jug covers a change with a new filter.
• 3.5L V6: have 6 quarts on hand.
• Do not mix up the grades: 0W-16 for the 4-cylinder, 0W-20 for the V6.
• Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.

Sources and how we checked

All capacities and oil grades on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):

• 2018 Camry owner’s manual (through July 2017 production)
• 2018 Camry owner’s manual (from Aug. 2017 production)
• 2019 Camry owner’s manual
• 2020 Camry owner’s manual
• 2021 Camry owner’s manual
• 2022 Camry owner’s manual
• 2023 Camry owner’s manual
• 2024 Camry owner’s manual

Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.

Last checked: October 21, 2026.

FAQ

How much oil does a 2018–2024 Toyota Camry take?

The 2.5L 4-cylinder takes 4.8 US quarts (4.5 L) with a filter change in 2018–2023 and 4.5 US quarts (4.3 L) in 2024. The 3.5L V6 takes 5.7 US quarts (5.4 L).

What oil does a 2018–2024 Camry use?

SAE 0W-16 for the 2.5L 4-cylinder and SAE 0W-20 for the 3.5L V6, according to Toyota’s manuals.

Can I use 0W-20 in a Camry 2.5L?

Only if 0W-16 is not available. The manuals say 0W-20 may be used, but it must be replaced with 0W-16 at the next oil change.

Why does the 2024 Camry 2.5L take less oil?

The 2024 owner’s manual lists 4.5 qt (4.3 L) with filter for the A25A-FKS engine, down from 4.8 qt (4.5 L) in the 2018–2023 manuals. Use the figure from your model year and check the dipstick.

How do I reset the maintenance light on a 2018–2024 Camry?

On the multi-information display, select Vehicle Settings, then Scheduled Maintenance, then Yes.

Older Camry? See the 2012–2017 Toyota Camry oil type and capacity.

Newer Camry? See the 2025 Toyota Camry (hybrid) oil type and capacity.