Quick answer: the 2013–2018 Toyota RAV4 2.5L takes 4.6 US qt (4.4 L) of oil with a filter change. Toyota recommends SAE 0W-20.
| Engine | Oil capacity (with filter) | Without filter | Oil type |
|---|---|---|---|
| 2.5L 4-cylinder (2AR-FE) | 4.6 US qt (4.4 L) | 4.2 US qt (4.0 L) | 0W-20 |
One 5-quart jug is enough. The 2.5L takes 4.6 quarts with a new filter. The 2019 and newer RAV4 uses a different engine and a different oil (0W-16).
Oil capacity by year
| Model year | Oil capacity (with filter) | Without filter |
|---|---|---|
| 2013 | 4.6 US qt (4.4 L) | 4.2 US qt (4.0 L) |
| 2014 | 4.6 US qt (4.4 L) | 4.2 US qt (4.0 L) |
| 2015 | 4.6 US qt (4.4 L) | 4.2 US qt (4.0 L) |
| 2016 | 4.6 US qt (4.4 L) | 4.2 US qt (4.0 L) |
| 2017 | 4.6 US qt (4.4 L) | 4.2 US qt (4.0 L) |
| 2018 | 4.6 US qt (4.4 L) | 4.2 US qt (4.0 L) |
We read the Specifications pages of all eight owner’s manuals Toyota publishes for 2013–2018 (2014 and 2015 have two each, split by production date). They all list the same engine, capacity and oil grade.
Recommended oil type
Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil (ILSAC GF-5 in these manuals) in SAE 0W-20. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.
How to reset the maintenance required light on the 2013–2018 Toyota RAV4
See also: Toyota maintenance required light reset for all models.
This is the procedure in the 2013 RAV4 owner’s manual (U.S. models). Later cars with a color multi-information display can also reset it from the settings screen; see your manual.
- Display trip meter A, then turn the engine switch off (or to LOCK).
- While pressing the DISP / ODO-TRIP button (the trip meter button), turn the engine switch to ON or IGNITION ON. Do not start the engine, or the reset mode is canceled.
- Keep holding the button until the trip meter shows 000000.
Oil change tips
- Add about 4 quarts, check the dipstick, then top up.
- Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.
What battery does the 2013–2018 Toyota RAV4 key fob take?
CR2032 for the smart key (push-button start) and CR2016 for the regular remote key. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.
| Model years | Key type | Battery |
|---|---|---|
| 2013–2018 | Smart key (keyless entry and push-button start) | CR2032 |
| 2013–2018 | Regular remote key (no smart key system) | CR2016 |
- You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
- Insert the new battery with the + terminal facing the way shown in the manual.
- Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
- A weak battery shows up as a shorter range or a key that works only up close.
Sources and how we checked
All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):
- 2013 RAV4 owner’s manual
- 2014 RAV4 owner’s manual (through Nov. 2013 production)
- 2014 RAV4 owner’s manual (from Dec. 2013 production)
- 2015 RAV4 owner’s manual (through Sep. 2014 production)
- 2015 RAV4 owner’s manual (from Oct. 2014 production)
- 2016 RAV4 owner’s manual
- 2017 RAV4 owner’s manual
- 2018 RAV4 owner’s manual
Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.
Last checked: October 21, 2026.
FAQ
How much oil does a 2018 Toyota RAV4 take?
A 2018 Toyota RAV4 with the 2.5L gas engine takes 4.6 US qt (4.4 L) of SAE 0W-20 with a filter change, or 4.2 US qt (4.0 L) without changing the filter. The RAV4 Hybrid has its own figures in its owner’s manual.
What oil does a 2014 Toyota RAV4 take?
SAE 0W-20. Every 2013–2018 RAV4 2.5L, including the 2014, takes 4.6 US qt (4.4 L) with a new filter.
How much oil does a 2013–2018 Toyota RAV4 take?
4.6 US quarts (4.4 L) with a filter change, for every model year from 2013 to 2018.
What oil does a 2013–2018 RAV4 use?
SAE 0W-20. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.
How much oil without changing the filter?
4.2 US quarts (4.0 L).
Does the 2019 RAV4 take the same oil?
No. The 2019 and newer RAV4 has the A25A-FKS engine, which takes 4.8 quarts (4.5 quarts from 2024) of SAE 0W-16.
How do I reset the maintenance light on a 2013–2018 RAV4?
With trip meter A shown, turn the engine switch off, then hold the DISP button while turning it to ON, and keep holding until the trip meter shows 000000.
Newer RAV4? See the 2019–2025 Toyota RAV4 oil type and capacity.