Quick answer: the 2012–2017 Toyota Tundra 4.6L and 5.7L V8 take 7.9 US qt (7.5 L) of oil with a filter change, and the 2018–2021 V8s take 8.5 US qt (8.0 L). The 4.0L V6 (2012–2014) takes 6.4 US qt (6.1 L). Toyota recommends SAE 0W-20.
| Engine | Oil capacity (with filter) | Without filter | Oil type |
|---|---|---|---|
| 4.0L V6 (1GR-FE), 2012–2014 | 6.4 US qt (6.1 L) | 5.9 US qt (5.6 L) | 0W-20 |
| 4.6L V8 (1UR-FE) and 5.7L V8 (3UR-FE, 3UR-FBE), 2012–2017 | 7.9 US qt (7.5 L) | 7.4–7.5 US qt (7.1 L) | 0W-20 |
| 4.6L V8 and 5.7L V8, 2018–2021 | 8.5 US qt (8.0 L) | 7.9 US qt (7.5 L) | 0W-20 |
The capacity went up in 2018. The 2018–2021 manuals list 8.5 quarts with a filter for the V8s, against 7.9 quarts in 2012–2017. Use the figure for your model year.
Oil capacity by year
| Model year | 4.0L V6 | 4.6L / 5.7L V8 |
|---|---|---|
| 2012 | 6.4 US qt (6.1 L) | 7.9 US qt (7.5 L) |
| 2013 | 6.4 US qt (6.1 L) | 7.9 US qt (7.5 L) |
| 2014 | 6.4 US qt (6.1 L) | 7.9 US qt (7.5 L) |
| 2015 | — | 7.9 US qt (7.5 L) |
| 2016 | — | 7.9 US qt (7.5 L) |
| 2017 | — | 7.9 US qt (7.5 L) |
| 2018 | — | 8.5 US qt (8.0 L) |
| 2019 | — | 8.5 US qt (8.0 L) |
| 2020 | — | 8.5 US qt (8.0 L) |
| 2021 | — | 8.5 US qt (8.0 L) |
We read the Specifications pages of the Tundra owner’s manuals for every model year from 2012 to 2021 (2014 has two, split by production date).
Recommended oil type
Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil (ILSAC GF-5 in these manuals) in SAE 0W-20. If 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.
How to reset the maintenance required light on the 2012–2021 Toyota Tundra
See also: Toyota maintenance required light reset for all models.
The 2012–2017 manuals use the trip meter button; the 2020–2021 manuals use the multi-information display menu (Vehicle Settings, Maintenance Reset, YES). This is the trip meter method from the 2017 manual.
- Turn the engine switch off with trip meter A displayed.
- While pressing the ODO/TRIP (trip meter) button, turn the engine switch on. Do not start the engine.
- Keep holding the button until the display confirms the reset (000000, or a reset message on the multi-information display).
Oil change tips
- V8: have 9 quarts on hand (two 5-quart jugs leave some for topping up).
- 4.0L V6: have 7 quarts on hand.
- Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.
What battery does the 2012–2021 Toyota Tundra key fob take?
CR2032 for 2012–2017, CR2016 for 2018–2019, and for 2020–2021 CR2032 (smart key) or CR2016 (regular remote). Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.
| Model years | Key type | Battery |
|---|---|---|
| 2012–2017 | Wireless remote control | CR2032 |
| 2018–2019 | Wireless remote control | CR2016 |
| 2020–2021 | Smart key (keyless entry and push-button start) | CR2032 |
| 2020–2021 | Regular remote key (no smart key system) | CR2016 |
- You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
- Insert the new battery with the + terminal facing the way shown in the manual.
- Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
- A weak battery shows up as a shorter range or a key that works only up close.
Sources and how we checked
All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):
- 2012 Tundra owner’s manual
- 2013 Tundra owner’s manual
- 2014 Tundra owner’s manual (through Feb. 2014 production)
- 2015 Tundra owner’s manual
- 2016 Tundra owner’s manual
- 2017 Tundra owner’s manual
- 2018 Tundra owner’s manual
- 2019 Tundra owner’s manual
- 2020 Tundra owner’s manual
- 2021 Tundra owner’s manual
Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.
Last checked: October 21, 2026.
FAQ
How much oil does a Toyota Tundra 5.7 take?
7.9 US quarts (7.5 L) with a filter change for 2012–2017 and 8.5 US quarts (8.0 L) for 2018–2021, according to Toyota’s manuals.
What oil does a 2012–2021 Tundra use?
SAE 0W-20. If it is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.
Why do 2018–2021 Tundras take more oil?
The 2018 and later owner’s manuals list 8.5 quarts (8.0 L) with filter for the V8, up from 7.9 quarts (7.5 L). Follow the figure for your model year and check the dipstick.
How much oil does the 4.0L V6 Tundra take?
6.4 US quarts (6.1 L) with a filter change and 5.9 quarts without. It is listed in the 2012–2014 manuals.
How do I reset the maintenance light on a Tundra?
On 2012–2017 trucks, turn the engine off with trip meter A shown, hold the ODO/TRIP button while turning it on, and keep holding until the reset is confirmed. On 2020–2021 trucks, use Vehicle Settings, Maintenance Reset, YES on the multi-information display.
Newer Tundra? See the 2022–2025 Toyota Tundra oil type and capacity.