Quick answer: the 2010–2013 Toyota Corolla 1.8L takes 4.4 US qt (4.2 L) of oil with a filter change, and the 2.4L takes 4.0 US qt (3.8 L). Toyota recommends SAE 0W-20.
| Engine | Oil capacity (with filter) | Without filter | Oil type |
|---|---|---|---|
| 1.8L 4-cylinder (2ZR-FE) | 4.4 US qt (4.2 L) | 4.1 US qt (3.9 L) | 0W-20 |
| 2.4L 4-cylinder (2AZ-FE) | 4.0 US qt (3.8 L) | 3.8 US qt (3.6 L) | 0W-20 |
The bigger engine takes less oil. The 2.4L takes 4.0 quarts with a filter, less than the 4.4 quarts of the 1.8L. Check which engine you have before you pour.
Oil capacity by year
| Model year | 1.8L | 2.4L |
|---|---|---|
| 2010 | 4.4 US qt (4.2 L) | 4.0 US qt (3.8 L) |
| 2011 | 4.4 US qt (4.2 L)* | 4.0 US qt (3.8 L)* |
| 2012 | 4.4 US qt (4.2 L) | 4.0 US qt (3.8 L) |
| 2013 | 4.4 US qt (4.2 L) | 4.0 US qt (3.8 L) |
We read the Specifications pages of the 2010, 2012 and 2013 Corolla owner’s manuals.
Recommended oil type
Toyota Genuine Motor Oil or an equivalent ILSAC multigrade oil in SAE 0W-20. The 2012 and 2013 manuals add that if 0W-20 is not available, 5W-20 may be used, but it must be replaced with 0W-20 at the next oil change.
How to reset the maintenance required light on the 2010–2013 Toyota Corolla
See also: Toyota maintenance required light reset for all models.
This is the procedure in the 2013 Corolla owner’s manual (U.S. models).
- Turn the engine switch off with trip meter A displayed.
- While pressing the trip meter reset button, turn the engine switch on.
- Keep holding the button until the trip meter shows 000000.
Oil change tips
- A 5-quart jug covers one change on either engine.
- Do not overfill. Toyota’s manuals tell you to warm up the engine, turn it off, wait about 5 minutes and then check the level on the dipstick.
What battery does the 2010–2013 Toyota Corolla key fob take?
CR1632 if the car has the smart key system (push-button start). Regular remote keys take a CR2025 (type A) or a CR2016 (type B); the manual shows both remote designs, so compare your key or check the battery when you open it. Data from Toyota’s owner’s manuals (Do-it-yourself maintenance: key battery), linked under Sources.
| Model years | Key type | Battery |
|---|---|---|
| 2010–2013 | Smart key (keyless entry and push-button start) | CR1632 |
| 2010–2013 | Regular remote key, type A | CR2025 |
| 2010–2013 | Regular remote key, type B | CR2016 |
- You need a flathead screwdriver (cover the tip with a rag or tape so you do not scratch the key) and the new lithium coin battery.
- Insert the new battery with the + terminal facing the way shown in the manual.
- Toyota notes the batteries are sold at Toyota dealers, electrical appliance shops and camera stores.
- A weak battery shows up as a shorter range or a key that works only up close.
Sources and how we checked
All capacities, oil grades and key fob battery types on this page come from Toyota’s owner’s manuals, published on Toyota’s official manuals site (Specifications → Maintenance data):
Toyota calls these capacities a reference quantity: always finish by checking the dipstick. If your owner’s manual shows something different, follow your manual and tell us.
Last checked: October 21, 2026.
FAQ
How much oil does a 2010 Toyota Corolla take?
A 2010 Toyota Corolla with the 1.8L engine takes 4.4 US qt (4.2 L) of SAE 0W-20 with a filter change. With the 2.4L engine it takes 4.0 US qt (3.8 L).
What oil does a 2013 Toyota Corolla take?
SAE 0W-20. The 2013 Corolla 1.8L takes 4.4 US qt (4.2 L) with a new filter, and the 2.4L takes 4.0 US qt (3.8 L).
How much oil does a 2010–2013 Toyota Corolla take?
4.4 US quarts (4.2 L) for the 1.8L and 4.0 US quarts (3.8 L) for the 2.4L, with a filter change.
What oil does a 2010–2013 Corolla use?
SAE 0W-20. The 2012–2013 manuals allow 5W-20 if 0W-20 is not available, to be replaced with 0W-20 at the next change.
How much oil without changing the filter?
4.1 quarts for the 1.8L and 3.8 quarts for the 2.4L.
Which Corolla has the 2.4L engine?
Check your window sticker, registration or engine cover. The manuals list the 2.4L (2AZ-FE) next to the standard 1.8L (2ZR-FE).
How do I reset the maintenance light on a 2010–2013 Corolla?
With trip meter A shown, turn the engine switch off, then hold the trip meter reset button while turning it on, until the trip meter shows 000000.
Newer Corolla? See the 2014–2019 Toyota Corolla oil type and capacity.