Quick answer: the 2015–2022 GMC Canyon 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 with a filter change. The 2.5L takes 5.0 qt (4.7 L): 5W-20 through 2018 and 0W-20 from 2019. The 2.8L Duramax diesel takes 6.0 qt (5.6 L) of 5W-30.
| Engine | Oil capacity (with filter) | Oil type | Specification |
|---|---|---|---|
| 2.5L 4-cylinder | 5.0 qt (4.7 L) | 5W-20 (2015–2018), 0W-20 (2019–2022) | dexos1 |
| 3.6L V6 | 6.0 qt (5.7 L) | 5W-30 | dexos1 |
| 2.8L Duramax diesel | 6.0 qt (5.6 L) | 5W-30 | see diesel supplement |
2.5L grade change in 2019. The 2015–2018 Canyon manuals list 5W-20 for the 2.5L; the 2019–2022 manuals list 0W-20. The V6 is 5W-30 every year.
Oil capacity by year
| Model year | 2.5L | 3.6L V6 | 2.8L diesel |
|---|---|---|---|
| 2015 | 5.0 qt (4.7 L) | 6.0 qt (5.7 L) | — |
| 2016 | 5.0 qt (4.7 L) | 6.0 qt (5.7 L) | 6.0 qt (5.6 L) |
| 2017 | 5.0 qt (4.7 L) | 6.0 qt (5.7 L) | 6.0 qt (5.6 L) |
| 2018 | 5.0 qt (4.7 L) | 6.0 qt (5.7 L) | 6.0 qt (5.6 L) |
| 2019 | 5.0 qt (4.7 L) | 6.0 qt (5.7 L) | 6.0 qt (5.6 L) |
| 2020 | 5.0 qt (4.7 L) | 6.0 qt (5.7 L) | 6.0 qt (5.6 L) |
| 2021 | 5.0 qt (4.7 L) | 6.0 qt (5.7 L) | 6.0 qt (5.6 L) |
| 2022 | 5.0 qt (4.7 L) | 6.0 qt (5.7 L) | 6.0 qt (5.6 L) |
GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.
Recommended oil type
2.5L: SAE 5W-20 (2015–2018) or SAE 0W-20 (2019–2022), dexos1.
3.6L V6: SAE 5W-30; 0W-30 below -20°F (-29°C).
2.8L Duramax: SAE 5W-30; 0W-40 in extreme cold, per the shared Chevrolet/GMC Duramax 2.8L supplement.
GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.
How to reset the oil life on the 2015–2022 GMC Canyon
See also: Oil life reset by brand.
- Display OIL LIFE REMAINING on the Driver Information Center (DIC). Without DIC buttons, the vehicle must be in P (Park).
- Press and hold the select button on the DIC (or the trip odometer reset stem / SET/CLR if there are no DIC buttons) for several seconds until the oil life shows 100%.
Reset only after an oil change; the system will not reset itself.
Oil change tips
- A 5-quart jug covers the 2.5L; the V6 and diesel need one more quart.
- Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.
Sources and how we checked
All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):
- 2015 GMC Canyon owner’s manual
- 2016 GMC Canyon owner’s manual
- 2017 GMC Canyon owner’s manual
- 2018 GMC Canyon owner’s manual
- 2019 GMC Canyon owner’s manual
- 2020 GMC Canyon owner’s manual
- 2021 GMC Canyon owner’s manual
- 2022 GMC Canyon owner’s manual
- 2021 Chevrolet and GMC Duramax 2.8L diesel supplement
If your owner’s manual shows something different, follow your manual and tell us.
Last checked: October 23, 2026.
FAQ
How much oil does a 2015–2022 Canyon take?
5.0 qt (4.7 L) for the 2.5L, 6.0 qt (5.7 L) for the 3.6L V6 and 6.0 qt (5.6 L) for the 2.8L diesel.
What oil does a 3.6 V6 Canyon use?
SAE 5W-30 dexos1.
What oil does a 2.5L Canyon use?
5W-20 through 2018 and 0W-20 from 2019.
What oil does the Canyon Duramax use?
SAE 5W-30, 6.0 qt (5.6 L).
How do I reset the oil life on a Canyon?
Show OIL LIFE REMAINING and hold the select button (or SET/CLR on the turn signal lever) until it reads 100%.
Newer Canyon? See the 2023–2025 GMC Canyon. Chevy twin: 2015–2022 Colorado.