Car Oil Specs

Category: GMC

  • 2014–2016 GMC Acadia Oil Type and Capacity (3.6L V6)

    Quick answer: the 2014–2016 GMC Acadia 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 dexos1 oil with a filter change.

    EngineOil capacity (with filter)Oil typeSpecification
    3.6L V66.0 qt (5.7 L)5W-30dexos1
    Source: GMC owner’s manuals (links below).

    5W-30 only. The 2014 manual calls 5W-30 the best grade and warns against 10W-30, 10W-40 and 20W-50. In extreme cold, below -20°F (-29°C), 0W-30 may be used. The 2017 redesign changed both engines and grades.

    Oil capacity by year

    Model yearCapacityOil
    20146.0 qt (5.7 L)5W-30
    20156.0 qt (5.7 L)5W-30
    20166.0 qt (5.7 L)5W-30

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    3.6L V6: SAE 5W-30 dexos1.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2014–2016 GMC Acadia

    See also: Oil life reset by brand.

    1. Turn the ignition to ON/RUN with the engine off.
    2. Press the vehicle information button until OIL LIFE REMAINING displays.
    3. Press and hold the select button until 100% displays and three chimes sound.
    4. Turn the key to LOCK/OFF.

    Steps from the 2016 manual.

    Oil change tips

    • A 5-quart jug plus one quart covers a change.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2014–2016 Acadia take?

    6.0 qt (5.7 L) with a filter change.

    What oil does a 2014–2016 Acadia use?

    SAE 5W-30 dexos1.

    Can I use 10W-30?

    The 2014 manual says not to.

    Can I use 0W-30?

    Only in extreme cold, below -20°F (-29°C).

    How do I reset the oil life on an Acadia?

    Show OIL LIFE REMAINING and hold the select button until it reads 100%.

    Newer Acadia? See the 2017–2025 GMC Acadia. Related: 2014–2017 Chevy Traverse.

  • 2017–2025 GMC Acadia Oil Type and Capacity (2.5L, 2.0L Turbo, 3.6L V6, 2.5L Turbo)

    Quick answer: the 2017–2023 GMC Acadia 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 with a filter change. The 2.0L turbo (2020–2023) takes 5.3 qt (5.0 L) of 0W-20. The 2.5L 4-cylinder takes 5.0 qt (FWD) or 6.0 qt (AWD). The redesigned 2024–2025 Acadia 2.5L turbo takes 5.5 qt (5.2 L) of 0W-20.

    EngineOil capacity (with filter)Oil typeSpecification
    2.5L 4-cylinder, FWD (2017–2021)5.0 qt (4.7 L)5W-20 (2017–2018), 0W-20 (2019–2021)dexos1
    2.5L 4-cylinder, AWD (2017–2021)6.0 qt (5.7 L)5W-20 (2017–2018), 0W-20 (2019–2021)dexos1
    2.0L turbo (2020–2023)5.3 qt (5.0 L)0W-20dexos1
    3.6L V6 (2017–2023)6.0 qt (5.7 L)5W-30dexos1
    2.5L turbo (2024–2025)5.5 qt (5.2 L)0W-20dexos1
    Source: GMC owner’s manuals (links below).

    Four engines, two grades. The V6 always uses 5W-30. The 4-cylinders (2.5L from 2019, 2.0L turbo, and the 2024+ 2.5L turbo) use 0W-20. The 2017–2018 2.5L uses 5W-20. The 2.5L also takes about one quart more with AWD.

    Oil capacity by year

    Model year2.5L FWD / AWD2.0L turbo3.6L V62.5L turbo
    20175.0 / 6.0 qt—6.0 qt (5.7 L)—
    20185.0 / 6.0 qt—6.0 qt (5.7 L)—
    20195.0 / 6.0 qt—6.0 qt (5.7 L)—
    20205.0 / 6.0 qt5.3 qt (5.0 L)6.0 qt (5.7 L)—
    20215.0 / 6.0 qt5.3 qt (5.0 L)6.0 qt (5.7 L)—
    2022—5.3 qt (5.0 L)6.0 qt (5.7 L)—
    2023—5.3 qt (5.0 L)6.0 qt (5.7 L)—
    2024———5.5 qt (5.2 L)
    2025———5.5 qt (5.2 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    3.6L V6: SAE 5W-30 dexos1; 0W-30 below -20°F (-29°C).

    2.5L: 5W-20 (2017–2018), 0W-20 (2019–2021).

    2.0L turbo: SAE 0W-20 dexos1.

    2.5L turbo (2024–2025): SAE 0W-20 dexos1.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2017–2025 GMC Acadia

    See also: Oil life reset by brand.

    2017–2023 (2020 manual): display REMAINING OIL LIFE on the DIC and press and hold the select button while it is shown, until it reads 100%.

    2024–2025 (2025 manual):

    1. Place the vehicle in P (Park).
    2. On the infotainment home screen select Vehicle Status > Maintenance > Oil Life > Reset.
    3. Select Reset again to confirm. The percentage changes to 100%.

    Oil change tips

    • The V6 and AWD 2.5L need a 5-quart jug plus one quart.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2017–2023 Acadia V6 take?

    6.0 qt (5.7 L) of SAE 5W-30 with a filter change.

    How much oil does the Acadia 2.0 turbo take?

    5.3 qt (5.0 L) of SAE 0W-20.

    How much oil does a 2024–2025 Acadia take?

    5.5 qt (5.2 L) of SAE 0W-20 for the 2.5L turbo.

    Why does the 2.5L AWD take more oil?

    The manuals list 6.0 qt for AWD and 5.0 qt for FWD.

    How do I reset the oil life on a 2024+ Acadia?

    Infotainment: Vehicle Status > Maintenance > Oil Life > Reset, then confirm.

    Older Acadia? See the 2014–2016 GMC Acadia. Related: 2018–2025 Chevy Traverse.

  • 2014–2017 GMC Terrain Oil Type and Capacity (2.4L and 3.6L V6)

    Quick answer: the 2014–2017 GMC Terrain 2.4L takes 5.0 qt (4.7 L) and the 3.6L V6 takes 6.0 qt (5.7 L) of oil with a filter change. Both use SAE 5W-30 dexos1.

    EngineOil capacity (with filter)Oil typeSpecification
    2.4L 4-cylinder5.0 qt (4.7 L)5W-30dexos1
    3.6L V66.0 qt (5.7 L)5W-30dexos1
    Source: GMC owner’s manuals (links below).

    5W-30 for both engines. The 2014 manual calls 5W-30 the best grade and warns against 10W-30, 10W-40 and 20W-50; 0W-30 is allowed below -20°F (-29°C).

    Oil capacity by year

    Model year2.4L3.6L V6
    20145.0 qt (4.7 L)6.0 qt (5.7 L)
    20155.0 qt (4.7 L)6.0 qt (5.7 L)
    20165.0 qt (4.7 L)6.0 qt (5.7 L)
    20175.0 qt (4.7 L)6.0 qt (5.7 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    Both engines: SAE 5W-30 dexos1; 0W-30 in extreme cold.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2014–2017 GMC Terrain

    See also: Oil life reset by brand.

    1. Turn the ignition to ON/RUN with the engine off.
    2. Press the DIC MENU button to show the Vehicle Information menu, and use the arrows to show REMAINING OIL LIFE.
    3. Press SET/CLR until 100% is displayed, then turn the key to LOCK/OFF.

    Alternative (2016 manual): with the ignition ON/RUN and the engine off, fully press and release the accelerator pedal three times within five seconds.

    Oil change tips

    • A 5-quart jug covers the 2.4L; the V6 needs one more quart.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2014–2017 Terrain take?

    5.0 qt (4.7 L) for the 2.4L and 6.0 qt (5.7 L) for the 3.6L V6.

    What oil does a 2.4 Terrain use?

    SAE 5W-30 dexos1.

    Can I use 0W-20 in a 2014–2017 Terrain?

    No, the manuals list 5W-30, with 0W-30 only in extreme cold.

    What oil does the V6 Terrain use?

    SAE 5W-30, 6.0 qt (5.7 L).

    How do I reset the oil life on a Terrain?

    Show REMAINING OIL LIFE in the DIC and press SET/CLR until it reads 100%.

    Newer Terrain? See the 2018–2025 GMC Terrain. Chevy twin: 2014–2017 Equinox.

  • 2018–2025 GMC Terrain Oil Type and Capacity (1.5L, 2.0L, Diesel)

    Quick answer: the 2018–2025 GMC Terrain 1.5L turbo takes 4.2 qt (4.0 L) with FWD and 5.3 qt (5.0 L) with AWD, of SAE 0W-20. The 2018–2020 2.0L turbo takes 5.0 qt (FWD) or 6.0 qt (AWD) of 5W-30, and the 1.6L diesel 5.3 qt of 5W-30.

    EngineOil capacity (with filter)Oil typeSpecification
    1.5L turbo, FWD4.2 qt (4.0 L)0W-20dexos1
    1.5L turbo, AWD5.3 qt (5.0 L)0W-20dexos1
    2.0L turbo, FWD (2018–2020)5.0 qt (4.7 L)5W-30dexos1
    2.0L turbo, AWD (2018–2020)6.0 qt (5.7 L)5W-30dexos1
    1.6L diesel (2018–2020 manuals)5.3 qt (5.0 L)5W-30dexos2
    Source: GMC owner’s manuals (links below).

    FWD and AWD differ by about a quart. GMC lists separate capacities by drive type for both turbo engines. The redesigned 2025 Terrain keeps the 1.5L at 4.2 qt (FWD) and 5.3 qt (AWD) of 0W-20.

    Oil capacity by year

    Model year1.5L FWD1.5L AWD2.0L FWD / AWD
    20184.2 qt (4.0 L)5.3 qt (5.0 L)5.0 / 6.0 qt
    20194.2 qt (4.0 L)5.3 qt (5.0 L)5.0 / 6.0 qt
    20204.2 qt (4.0 L)5.3 qt (5.0 L)5.0 / 6.0 qt
    20214.2 qt (4.0 L)5.3 qt (5.0 L)—
    20224.2 qt (4.0 L)5.3 qt (5.0 L)—
    20234.2 qt (4.0 L)5.3 qt (5.0 L)—
    20244.2 qt (4.0 L)5.3 qt (5.0 L)—
    20254.2 qt (4.0 L)5.3 qt (5.0 L)—

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    1.5L turbo: SAE 0W-20 dexos1 (full synthetic; the 2018 manual names ACDelco or Mobil 1 0W-20).

    2.0L turbo: SAE 5W-30; 0W-30 below -20°F (-29°C).

    1.6L diesel: SAE 5W-30 dexos2; 0W-40 in extreme cold.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2018–2025 GMC Terrain

    See also: Oil life reset by brand.

    1. Display REMAINING OIL LIFE on the DIC.
    2. Press and hold the select button for several seconds while the oil life display is active.
    3. REMAINING OIL LIFE 100% displays when the reset worked.

    Steps from the 2022 manual. Reset only after an oil change.

    Oil change tips

    • A 5-quart jug covers the FWD 1.5L; AWD needs a 5-quart jug plus a quart.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2018–2025 Terrain 1.5 take?

    4.2 qt (4.0 L) with FWD and 5.3 qt (5.0 L) with AWD.

    What oil does a 1.5 turbo Terrain use?

    SAE 0W-20 dexos1.

    What oil does the 2.0 turbo Terrain use?

    SAE 5W-30: 5.0 qt (FWD) or 6.0 qt (AWD).

    Why does AWD take more oil?

    GMC’s table lists a larger figure for AWD; use the number for your drive type.

    How do I reset the oil life on a Terrain?

    Show REMAINING OIL LIFE on the DIC and hold the select button until it shows 100%.

    Older Terrain? See the 2014–2017 GMC Terrain. Chevy twin: 2018–2025 Equinox.

  • 2015–2022 GMC Canyon Oil Type and Capacity (2.5L, 3.6L V6, 2.8L Diesel)

    Quick answer: the 2015–2022 GMC Canyon 3.6L V6 takes 6.0 qt (5.7 L) of SAE 5W-30 with a filter change. The 2.5L takes 5.0 qt (4.7 L): 5W-20 through 2018 and 0W-20 from 2019. The 2.8L Duramax diesel takes 6.0 qt (5.6 L) of 5W-30.

    EngineOil capacity (with filter)Oil typeSpecification
    2.5L 4-cylinder5.0 qt (4.7 L)5W-20 (2015–2018), 0W-20 (2019–2022)dexos1
    3.6L V66.0 qt (5.7 L)5W-30dexos1
    2.8L Duramax diesel6.0 qt (5.6 L)5W-30see diesel supplement
    Source: GMC owner’s manuals (links below).

    2.5L grade change in 2019. The 2015–2018 Canyon manuals list 5W-20 for the 2.5L; the 2019–2022 manuals list 0W-20. The V6 is 5W-30 every year.

    Oil capacity by year

    Model year2.5L3.6L V62.8L diesel
    20155.0 qt (4.7 L)6.0 qt (5.7 L)—
    20165.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20175.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20185.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20195.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20205.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20215.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)
    20225.0 qt (4.7 L)6.0 qt (5.7 L)6.0 qt (5.6 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    2.5L: SAE 5W-20 (2015–2018) or SAE 0W-20 (2019–2022), dexos1.

    3.6L V6: SAE 5W-30; 0W-30 below -20°F (-29°C).

    2.8L Duramax: SAE 5W-30; 0W-40 in extreme cold, per the shared Chevrolet/GMC Duramax 2.8L supplement.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2015–2022 GMC Canyon

    See also: Oil life reset by brand.

    1. Display OIL LIFE REMAINING on the Driver Information Center (DIC). Without DIC buttons, the vehicle must be in P (Park).
    2. Press and hold the select button on the DIC (or the trip odometer reset stem / SET/CLR if there are no DIC buttons) for several seconds until the oil life shows 100%.

    Reset only after an oil change; the system will not reset itself.

    Oil change tips

    • A 5-quart jug covers the 2.5L; the V6 and diesel need one more quart.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2015–2022 Canyon take?

    5.0 qt (4.7 L) for the 2.5L, 6.0 qt (5.7 L) for the 3.6L V6 and 6.0 qt (5.6 L) for the 2.8L diesel.

    What oil does a 3.6 V6 Canyon use?

    SAE 5W-30 dexos1.

    What oil does a 2.5L Canyon use?

    5W-20 through 2018 and 0W-20 from 2019.

    What oil does the Canyon Duramax use?

    SAE 5W-30, 6.0 qt (5.6 L).

    How do I reset the oil life on a Canyon?

    Show OIL LIFE REMAINING and hold the select button (or SET/CLR on the turn signal lever) until it reads 100%.

    Newer Canyon? See the 2023–2025 GMC Canyon. Chevy twin: 2015–2022 Colorado.

  • 2023–2025 GMC Canyon Oil Type and Capacity (2.7L Turbo)

    Quick answer: the 2023–2025 GMC Canyon (including Denali and AT4X) takes 6.0 qt (5.7 L) of SAE 5W-30 dexos1 oil with a filter change.

    EngineOil capacity (with filter)Oil typeSpecification
    2.7L turbo 4-cylinder6.0 qt (5.7 L)5W-30dexos1
    Source: GMC owner’s manuals (links below).

    One engine for every trim. All three manuals list 6.0 qt of 5W-30 for the 2.7L turbo, with 0W-30 allowed below -20°F (-29°C).

    Oil capacity by year

    Model yearCapacityOil
    20236.0 qt (5.7 L)5W-30
    20246.0 qt (5.7 L)5W-30
    20256.0 qt (5.7 L)5W-30

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    2.7L turbo: SAE 5W-30 dexos1; 0W-30 in extreme cold.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2023–2025 GMC Canyon

    See also: Oil life reset by brand.

    1. Place the vehicle in P (Park).
    2. On the infotainment home screen select Vehicle Status > Maintenance > Oil Life > Reset.
    3. Select Reset again to confirm. The percentage changes to 100%.

    Steps from the 2024 manual.

    Oil change tips

    • A 5-quart jug plus one quart covers a change.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2023–2025 Canyon take?

    6.0 qt (5.7 L) with a filter change.

    What oil does the 2.7 turbo Canyon use?

    SAE 5W-30 dexos1.

    Does the AT4X take different oil?

    No, all trims use the 2.7L turbo with the same figures.

    Can I use 0W-20?

    The manuals list 5W-30, with 0W-30 only for extreme cold.

    How do I reset the oil life on a 2024 Canyon?

    Infotainment: Vehicle Status > Maintenance > Oil Life > Reset, then confirm.

    Older Canyon? See the 2015–2022 GMC Canyon. Chevy twin: 2023–2025 Colorado.

  • 2019–2025 GMC Sierra 1500 Oil Type and Capacity (All Engines)

    Quick answer: the 2019–2025 GMC Sierra 1500 5.3L and 6.2L V8 take 8.0 qt (7.6 L) of oil with a filter change; the 5.3L uses SAE 0W-20. The 2.7L TurboMax and 4.3L V6 take 6.0 qt (5.7 L) of SAE 5W-30, and the 3.0L Duramax diesel takes 7.0 qt (6.6 L) of 0W-20 dexosD.

    EngineOil capacity (with filter)Oil typeSpecification
    2.7L turbo6.0 qt (5.7 L)5W-30dexos1
    4.3L V6 (2019–2021)6.0 qt (5.7 L)5W-30dexos1
    5.3L V88.0 qt (7.6 L)0W-20dexos1
    6.2L V88.0 qt (7.6 L)0W-20 (2019–20, 2025); see oil fill cap (2021–24)dexos1
    3.0L Duramax diesel7.0 qt (6.6 L)0W-20dexosD
    Source: GMC owner’s manuals (links below).

    6.2L Denali and AT4 owners: check the oil fill cap. The 2021–2024 Sierra manuals say to use the viscosity printed on the 6.2L fill cap instead of giving one grade. The 2019–2020 and 2025 manuals list 0W-20.

    Oil capacity by year

    Model year2.7L turbo4.3L V65.3L / 6.2L V83.0L diesel
    20196.0 qt (5.7 L)6.0 qt (5.7 L)8.0 qt (7.6 L)—
    20206.0 qt (5.7 L)6.0 qt (5.7 L)8.0 qt (7.6 L)7.0 qt (6.6 L)
    20216.0 qt (5.7 L)6.0 qt (5.7 L)8.0 qt (7.6 L)7.0 qt (6.6 L)
    20226.0 qt (5.7 L)—8.0 qt (7.6 L)7.0 qt (6.6 L)
    20236.0 qt (5.7 L)—8.0 qt (7.6 L)7.0 qt (6.6 L)
    20246.0 qt (5.7 L)—8.0 qt (7.6 L)7.0 qt (6.6 L)
    20256.0 qt (5.7 L)—8.0 qt (7.6 L)7.0 qt (6.6 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    5.3L V8: SAE 0W-20 dexos1.

    6.2L V8: 0W-20 in the 2019, 2020 and 2025 manuals; the 2021–2024 manuals say to follow the oil fill cap.

    2.7L turbo and 4.3L V6: SAE 5W-30; 0W-30 below -20°F (-29°C).

    3.0L Duramax: SAE 0W-20 meeting dexosD, per the Duramax 3.0L supplement shared with Chevrolet.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2019–2025 GMC Sierra 1500

    See also: Oil life reset by brand.

    1. Display the oil life percentage on the DIC.
    2. Press the thumbwheel on the steering wheel (or the trip odometer reset stem without DIC controls) for several seconds.
    3. When the confirmation message displays, select YES. The oil life changes to 100%.

    Oil change tips

    • The V8 needs two 5-quart jugs.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2019–2025 Sierra 1500 take?

    8.0 qt (7.6 L) for the 5.3L and 6.2L V8, 6.0 qt (5.7 L) for the 2.7L turbo and 4.3L V6, and 7.0 qt (6.6 L) for the 3.0L Duramax.

    What oil does a 2019+ Sierra 5.3 use?

    SAE 0W-20 dexos1.

    What oil does the Sierra 6.2L use?

    0W-20 in the 2019–2020 and 2025 manuals; for 2021–2024 use the grade on the oil fill cap.

    What oil does the 2.7 TurboMax use?

    SAE 5W-30 dexos1.

    How do I reset the oil life on a 2021+ Sierra?

    Show the oil life on the DIC, press the thumbwheel for several seconds and select YES.

    Older truck? See the 2014–2018 GMC Sierra 1500. Chevy twin: 2019–2025 Silverado 1500.

  • 2014–2020 GMC Yukon and Yukon XL Oil Type and Capacity (5.3L and 6.2L V8)

    Quick answer: the 2016–2020 GMC Yukon and Yukon XL (5.3L and 6.2L V8) take 8.0 qt (7.6 L) of SAE 0W-20 with a filter change. The 2015 manual lists 8.5 qt (8.0 L). The 2014 Yukon, the last of the previous generation, takes 6.0 qt (5.7 L) of SAE 5W-30.

    EngineOil capacity (with filter)Oil typeSpecification
    5.3L / 6.2L V8 (2016–2020)8.0 qt (7.6 L)0W-20dexos1
    5.3L / 6.2L V8 (2015)8.5 qt (8.0 L)0W-20dexos1
    V8 (2014)6.0 qt (5.7 L)5W-30dexos1
    Source: GMC owner’s manuals (links below).

    Three numbers in seven years. 2014: 6.0 qt of 5W-30. 2015 (redesign): 8.5 qt of 0W-20. 2016–2020: 8.0 qt of 0W-20. The Yukon XL and Denali share the same manual and figures.

    Oil capacity by year

    Model yearCapacityOil
    20146.0 qt (5.7 L)5W-30
    20158.5 qt (8.0 L)0W-20
    20168.0 qt (7.6 L)0W-20
    20178.0 qt (7.6 L)0W-20
    20188.0 qt (7.6 L)0W-20
    20198.0 qt (7.6 L)0W-20
    20208.0 qt (7.6 L)0W-20

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    2015–2020: SAE 0W-20 dexos1.

    2014: SAE 5W-30 dexos1; the manual warns against 10W-30, 10W-40 and 20W-50.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2014–2020 GMC Yukon and Yukon XL

    See also: Oil life reset by brand.

    1. Display REMAINING OIL LIFE on the DIC.
    2. Press and hold the select button until it shows 100%.

    Alternative (2016 manual): with the ignition ON/RUN and the engine off, fully press the accelerator pedal slowly three times within five seconds.

    Oil change tips

    • The 2015–2020 V8 needs two 5-quart jugs.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2016–2020 Yukon take?

    8.0 qt (7.6 L) with a filter change; the 2015 manual lists 8.5 qt.

    What oil does a 2015–2020 Yukon use?

    SAE 0W-20 dexos1.

    What oil does a 2014 Yukon use?

    SAE 5W-30, 6.0 qt (5.7 L).

    Do the Yukon and Yukon XL take the same oil?

    Yes, same manual, capacity and grade.

    How do I reset the oil life on a Yukon?

    Show REMAINING OIL LIFE on the DIC and hold the select button until it reads 100%.

    Newer model? See the 2021–2025 GMC Yukon. Chevy twin: 2014–2020 Tahoe and Suburban.

  • 2021–2025 GMC Yukon and Yukon XL Oil Type and Capacity (5.3L, 6.2L, 3.0L Diesel)

    Quick answer: the 2021–2025 GMC Yukon and Yukon XL 5.3L and 6.2L V8 take 8.0 qt (7.6 L) of oil with a filter change; the 5.3L uses SAE 0W-20. The 3.0L Duramax diesel takes 7.0 qt (6.6 L) of 0W-20 dexosD.

    EngineOil capacity (with filter)Oil typeSpecification
    5.3L V88.0 qt (7.6 L)0W-20dexos1
    6.2L V88.0 qt (7.6 L)See oil fill cap (2021–2024); 0W-20 (2025)dexos1
    3.0L Duramax diesel7.0 qt (6.6 L)0W-20dexosD
    Source: GMC owner’s manuals (links below).

    Denali 6.2L: read the fill cap. The 2021–2024 Yukon manuals tell 6.2L owners to use the viscosity printed on the engine oil fill cap. The 2025 manual lists SAE 0W-20.

    Oil capacity by year

    Model year5.3L / 6.2L V83.0L diesel
    20218.0 qt (7.6 L)7.0 qt (6.6 L)
    20228.0 qt (7.6 L)7.0 qt (6.6 L)
    20238.0 qt (7.6 L)7.0 qt (6.6 L)
    20248.0 qt (7.6 L)7.0 qt (6.6 L)
    20258.0 qt (7.6 L)7.0 qt (6.6 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    5.3L V8: SAE 0W-20 dexos1.

    6.2L V8: grade on the oil fill cap (2021–2024); 0W-20 in the 2025 manual.

    3.0L Duramax: SAE 0W-20 dexosD, 7.0 qt (6.6 L).

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2021–2025 GMC Yukon and Yukon XL

    See also: Oil life reset by brand.

    1. Display the oil life percentage on the DIC.
    2. Press the thumbwheel on the steering wheel (or the trip odometer reset stem without DIC controls) for several seconds.
    3. When the confirmation message displays, select YES. The oil life changes to 100%.

    Oil change tips

    • The V8 needs two 5-quart jugs.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2021–2025 Yukon take?

    8.0 qt (7.6 L) for the V8s and 7.0 qt (6.6 L) for the 3.0L Duramax.

    What oil does a 2021+ Yukon 5.3 use?

    SAE 0W-20 dexos1.

    What oil does the Yukon Denali 6.2L use?

    For 2021–2024, the grade on the oil fill cap; the 2025 manual lists 0W-20.

    What oil does the Yukon Duramax use?

    SAE 0W-20 dexosD.

    How do I reset the oil life on a 2021+ Yukon?

    Show the oil life on the DIC, press the thumbwheel for several seconds and select YES.

    Older model? See the 2014–2020 GMC Yukon. Chevy twin: 2021–2025 Tahoe and Suburban.

  • 2014–2018 GMC Sierra 1500 Oil Type and Capacity (4.3L V6, 5.3L and 6.2L V8)

    Quick answer: the 2016–2018 GMC Sierra 1500 5.3L and 6.2L V8 take 8.0 qt (7.6 L) of SAE 0W-20 with a filter change; the 2014 and 2015 Sierra manuals list 8.5 qt (8.0 L). The 4.3L V6 takes 6.0 qt (5.7 L) of SAE 5W-30.

    EngineOil capacity (with filter)Oil typeSpecification
    4.3L V66.0 qt (5.7 L)5W-30dexos1
    5.3L / 6.2L V8 (2014–2015)8.5 qt (8.0 L)0W-20dexos1
    5.3L / 6.2L V8 (2016–2018)8.0 qt (7.6 L)0W-20dexos1
    Source: GMC owner’s manuals (links below).

    The V8 figure dropped in 2016. The 2014 and 2015 GMC Sierra manuals print 8.5 qt (8.0 L) for the V8s; from 2016 they print 8.0 qt (7.6 L). The Chevy Silverado shares these engines, but its 2015 manual already shows 8.0 qt, so go by the GMC manual for your year.

    Oil capacity by year

    Model year4.3L V65.3L / 6.2L V8
    20146.0 qt (5.7 L)8.5 qt (8.0 L)
    20156.0 qt (5.7 L)8.5 qt (8.0 L)
    20166.0 qt (5.7 L)8.0 qt (7.6 L)
    20176.0 qt (5.7 L)8.0 qt (7.6 L)
    20186.0 qt (5.7 L)8.0 qt (7.6 L)

    GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.

    Recommended oil type

    5.3L and 6.2L V8: SAE 0W-20 meeting dexos1.

    4.3L V6: SAE 5W-30; SAE 0W-30 below -20°F (-29°C). The 2014 manual warns against 10W-30, 10W-40 and 20W-50.

    The 2016 and 2018 manuals also list a 6.0L V8 with 6.0 qt (5.7 L) of 5W-30.

    GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.

    How to reset the oil life on the 2014–2018 GMC Sierra 1500

    See also: Oil life reset by brand.

    1. Display OIL LIFE REMAINING on the Driver Information Center (DIC). Without DIC buttons, the vehicle must be in P (Park).
    2. Press and hold the select button on the DIC (or the trip odometer reset stem / SET/CLR if there are no DIC buttons) for several seconds until the oil life shows 100%.

    Reset only after an oil change; the system will not reset itself.

    Oil change tips

    • The V8 needs two 5-quart jugs.
    • Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.

    Sources and how we checked

    All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):

    If your owner’s manual shows something different, follow your manual and tell us.

    Last checked: October 23, 2026.

    FAQ

    How much oil does a 2014–2018 Sierra 1500 take?

    The 5.3L and 6.2L V8 take 8.5 qt (2014–2015) or 8.0 qt (2016–2018); the 4.3L V6 takes 6.0 qt, with a filter change.

    What oil does a 5.3 Sierra use?

    SAE 0W-20 dexos1.

    What oil does the 4.3 V6 Sierra use?

    SAE 5W-30 dexos1.

    Is the Sierra the same as the Silverado?

    Same engines and oil grades, but check the GMC manual: the 2015 capacities are printed differently.

    How do I reset the oil life on a Sierra?

    Show OIL LIFE REMAINING on the DIC and hold the select button or reset stem until it reads 100%.

    Newer truck? See the 2019–2025 GMC Sierra 1500. Chevy twin: 2014–2018 Silverado 1500.