Quick answer: the 2016–2020 GMC Yukon and Yukon XL (5.3L and 6.2L V8) take 8.0 qt (7.6 L) of SAE 0W-20 with a filter change. The 2015 manual lists 8.5 qt (8.0 L). The 2014 Yukon, the last of the previous generation, takes 6.0 qt (5.7 L) of SAE 5W-30.
| Engine | Oil capacity (with filter) | Oil type | Specification |
|---|---|---|---|
| 5.3L / 6.2L V8 (2016–2020) | 8.0 qt (7.6 L) | 0W-20 | dexos1 |
| 5.3L / 6.2L V8 (2015) | 8.5 qt (8.0 L) | 0W-20 | dexos1 |
| V8 (2014) | 6.0 qt (5.7 L) | 5W-30 | dexos1 |
Three numbers in seven years. 2014: 6.0 qt of 5W-30. 2015 (redesign): 8.5 qt of 0W-20. 2016–2020: 8.0 qt of 0W-20. The Yukon XL and Denali share the same manual and figures.
Oil capacity by year
| Model year | Capacity | Oil |
|---|---|---|
| 2014 | 6.0 qt (5.7 L) | 5W-30 |
| 2015 | 8.5 qt (8.0 L) | 0W-20 |
| 2016 | 8.0 qt (7.6 L) | 0W-20 |
| 2017 | 8.0 qt (7.6 L) | 0W-20 |
| 2018 | 8.0 qt (7.6 L) | 0W-20 |
| 2019 | 8.0 qt (7.6 L) | 0W-20 |
| 2020 | 8.0 qt (7.6 L) | 0W-20 |
GM lists one capacity per engine, including the oil filter. We checked the capacity table in every model-year manual on this page.
Recommended oil type
2015–2020: SAE 0W-20 dexos1.
2014: SAE 5W-30 dexos1; the manual warns against 10W-30, 10W-40 and 20W-50.
GM requires oils that meet its dexos specification (dexos1 for gasoline engines, dexos2 or dexosD for diesels) and carry the dexos approved logo. ACDelco dexos oil is recommended. Do not add anything to the oil.
How to reset the oil life on the 2014–2020 GMC Yukon and Yukon XL
See also: Oil life reset by brand.
- Display REMAINING OIL LIFE on the DIC.
- Press and hold the select button until it shows 100%.
Alternative (2016 manual): with the ignition ON/RUN and the engine off, fully press the accelerator pedal slowly three times within five seconds.
Oil change tips
- The 2015–2020 V8 needs two 5-quart jugs.
- Add a little less than the full capacity, run the engine briefly, wait, and check the dipstick before topping up.
Sources and how we checked
All capacities and oil grades on this page come from GMC’s owner’s manuals, published on GM’s official manuals site (“Capacities and Specifications” and “Selecting the Right Engine Oil”):
- 2014 GMC Yukon owner’s manual
- 2015 GMC Yukon owner’s manual
- 2016 GMC Yukon owner’s manual
- 2017 GMC Yukon owner’s manual
- 2018 GMC Yukon owner’s manual
- 2019 GMC Yukon owner’s manual
- 2020 GMC Yukon owner’s manual
If your owner’s manual shows something different, follow your manual and tell us.
Last checked: October 23, 2026.
FAQ
How much oil does a 2016–2020 Yukon take?
8.0 qt (7.6 L) with a filter change; the 2015 manual lists 8.5 qt.
What oil does a 2015–2020 Yukon use?
SAE 0W-20 dexos1.
What oil does a 2014 Yukon use?
SAE 5W-30, 6.0 qt (5.7 L).
Do the Yukon and Yukon XL take the same oil?
Yes, same manual, capacity and grade.
How do I reset the oil life on a Yukon?
Show REMAINING OIL LIFE on the DIC and hold the select button until it reads 100%.
Newer model? See the 2021–2025 GMC Yukon. Chevy twin: 2014–2020 Tahoe and Suburban.